JVC GY-HD200E, GY-HD200CHU, GY-HD200U manual Backup Recording, HDV/DV Dubbing Cont’d, Settings, Off

USING EXTERNAL COMPONENTS

HDV/DV Dubbing (Cont’d)

When Using the GY-HD200U/GY-HD201E

as Recording Unit

(Dubbing From Another Videocassette)

1.Set the IEEE1394 switch on left side of the GY-HD200U/ GY-HD201E.

MEMO

In HDV format, the UB set in this device is recorded regard- less of the setting.

Backup Recording

Backup Recording of this Device’s Cam- era Image and Sound Through the IEEE1394 Connector

This device’s camera image and sound can be recorded for backup on another component that is equipped with IEEE1394 connector.

„Backup unit

• Place in HDV/DV signal input mode.

* Depending on the used component, it may be neces- sary to set “REMOTE SELECT”.

•When BR-HD50 is used, set the Backup Recording function to OFF.

Also, set REM SEL HDV/DV in the REMOTE[1/2] menu of the BR-HD50 to ON or LOC+REM.

•Insert the tape and set to STOP or REC PAUSE status.

CAUTION

• Set the IEEE1394 switch on both devices to either HDV

or DV.

DV : When dubbing in DV format
HDV : When dubbing in HDV format
2. Connect the units with the IEEE1394 cable.
3. Turn ON both units.
4. Place the GY-HD200U/GY-HD201E in the VTR MODE.
Press the CAM/VTR button to turn on the VTR indicator.	TC/UB
5. Set the frame rate.
Set the FRAME RATE item (60/30, 50/25, 24) on the
VIDEO FORMAT[1/2] menu to match the HDV/DV signal
frame rate input from the IEEE1394 connector.
X See page 74.

Connections

Use this device as the master unit.

Connect the master unit and the backup unit with a IEEE1394 cable.

1.

IEEE1394 switch

•	Start recording after making sure that both devices are
	properly connected.
•	If the RET button is pressed during backup recording,
	output from the IEEE1394 terminal is stopped, the image
	is switched to the image recorded on this device, inter-
	rupting the backup recording image.

Operation

Start and stop of recording on the backup unit takes place in accordance with the operation of the REC/VTR trigger button on the master unit.

1.

IEEE1394 switch

CH2-AUDIO OUT-CH1 VIDEO

1394IEEE

Recording unit

Date and Time

7.Insert the videocassettes.

GY-HD200U/ : Insert the videocassette to be dubbed

Master unit (this device)

VIDEO

CH2-AUDIO OUT-CH1

IEEE 1394

	Backup unit
Signal flow	IEEE1394 cable

(Depending on this device or the backup unit, the image, audio, and/or time code may deviate from what they should be at the points where the recording is started or stopped.)

MEMO

• When the backup recording is started, the “TRIGGER

TO DV” or “TRIGGER TO HDV” indication is shown on

the LCD or in the viewfinder for approx. 3 seconds.

• When the Series Recording function of BR-HD50 is

used, this device’s 1394 REC TRIG. item should be set

to OFF.

		2.
Signal flow	IEEE1394 cable

CAUTION

•Set the IEEE1394 switch on both devices to either HDV or DV.

•Start recording after making sure that both devices are properly connected.

6.Set the time code and user bit recording.

Set the TC DUPLI. item on the TC/UB/CLOCK menu screen.

OFF	: Records the TC/UB set in this
	device.
ON	: Records the TC/UB for the
	IEEE1394 input.
Date and time data	: Records the data sent from the
	playback device in DV format.
	Records the data of the internal
	clock in HDV format.

GY-HD201E	to.
Playback unit	: Insert the recorded videocassette.

8.Start playback on the playback unit.

For details, see the instructions to the unit used for play- back.

•The playback picture from the playback unit appears on the GY-HD200U/GY-HD201E’s LCD monitor and viewfinder screen.

9.Press the REC/VTR trigger button on the GY-HD200U/ GY-HD201E to start recording.

„ To temporarily pause the recording, press the REC or VTR trigger button.

„ To restart the recording, press the REC or VTR trigger button again.

10.When dubbing is completed.

Press the REC/VTR trigger button or the STOP button on the GY-HD200U/GY-HD201E to stop recording, and then stop playback on the playback unit.

MEMO

Depending on the player, sound may not be heard momen- tarily from this device when switching modes from STILL to PLAY.

Settings

„Master unit (this device)

1.Set the IEEE1394 switch on left side of this device.

DV : When backup in DV format

HDV : When backup in HDV format

2.Place in Camera mode.

3.Set the 1394 REC TRIG. item on the OTHERS[2/2] menu screen. X See page 94.

For HDV mode, set the BACK SPACE [HDV] item. X See page 94.

OTHERS[2/2] menu screen

• If the backup device is equipped with a feature to record

time codes input from the IEEE1394 connector (TC

DUPLICATE feature), time code data the same as on the

master side can be recorded.

If the master unit tape is paused or stopped when the

master unit time code running mode is in REC RUN

mode, the time code for the slave unit stops.

• When using BR-HD50 as a backup device and switching

this device from the playback mode to the record mode,

noise will be noticed on the monitor output screen of BR-

HD50 (backup will be correctly recorded).

66 67