PREPARATIONS FOR OPERATION
Screen Adjustment |
| Viewfinder Adjustment |
|
|
|
LCD monitor direction, angle, screen brightness, etc. can be | Direction of the Viewfinder | |
adjusted. | Adjust the position and angle of the viewfinder. | |
|
| |
Back Focus Adjustment
It is only necessary to perform this when the lens is attached for the first time or when focusing is not correct in both the telephoto and
1. Set the IRIS mode switch to M (Manual). |
2. Set the zoom mode to M (Manual). |
3. Open the iris by turning the iris ring. |
If the illumination is too strong, reduce it or move to a |
darker place. |
4. Turn the zoom lever until the lens is at the maximum tele- |
photo position. |
5. Bring the subject into focus. |
Adjusting the Direction and Angle of the LCD monitor
•With the LCD door in the open condition, rotate the LCD door.
•It can be turned 180° in upward direction and 90° in down- ward direction.
When turned 180° upward direction, the LCD monitor can be viewed from the lens side (vertically inverted image).
Diopter Adjustment
Rotate the eyepiece focusing ring until the viewfinder screen image is clearly visible.
Adjustment of the Viewfinder Screen
•PEAKING:
Adjusts the contour of the LCD monitor and the viewfinder screen.
•VF BRIGHT:
Adjusts the brightness of the viewfinder screen.
•It is easier to adjust back focus when the subject is more than 3 meters from the camera.
The optimal subject for this adjustment is a Siemens star chart.
3 | 4, 6 | 5 |
6. Set the lens to maximum |
7. Loosen the back focus ring retaining knob. |
8. View the same subject and adjust the back focus ring for |
the best possible focus. |
9. Repeat steps 4. through 8. about three times for fine |
adjustment until the subject remains in focus in both the |
telephoto position and the |
10.Tighten the back focus ring retaining knob to secure the ring.
180° up
PEAKING volume
LCD BRIGHT button
90° down
LCD lock release lever
Eyepiece focusing ring
VF BRIGHT volume
PEAKING volume
Sliding securing ring
Eyepiece
1
Adjusting the LCD monitor
•PEAKING:
Adjusts the contour of the LCD monitor.
•LCD BRIGHT:
Adjusts the brightness of the LCD monitor.
Adjustments are made on the LCD/VF[2/4] menu screen. X See page 90.
•LCD MIRROR MODE:
Sets the LCD monitor to display mirrored images when shooting facing the subject.
Adjustments are made on the LCD/VF[4/4] menu screen. X See page 92.
•LCD CONTRAST:
Adjusts the contrast of the LCD monitor.
•BLACK & WHITE:
Sets the LCD monitor and viewfinder to black and white display.
Viewfinder mount base
Adjustments are made on the LCD/VF[4/4] menu screen. X See page 92.
•VF CONTRAST:
Adjusts the contrast of the viewfinder screen.
•BLACK & WHITE:
Sets the LCD monitor and viewfinder to black and white display.
MEMO
The screen size of the viewfinder can be changed by selecting the desired size with the ASPECT item on the VIDEO FORMAT[1/2] menu screen (4:3 or 16:9).
2 7, 8, 10
Siemens star chart
50 | 51 |
