Proxima ASA 4100/4200 manual Connecting NON-COMPUTER Audio, 16Audio Input ports

To connect an S-video source:

1Insert one end of the S-VIDEO cable into the mini-DIN Video Out port of the video source device.

2Insert the other end of the S-VIDEO cable into the projector’s S-VIDEO port.

CONNECTING NON-COMPUTER AUDIO

The AUDIO ports allow the projector to receive stereo or monaural audio inputs from a composite video source.

Audio

Audio

Figure 2-16Audio Input ports

For stereo audio, use the supplied AV cable.

1Insert the red (right) and white (left) ends of the cable into the AUDIO OUT ports of a composite video's audio source.

2Connect the other end of each cable to the projector’s AUDIO ports.

NOTE: Although both COMPUTER AUDIO and AUDIO may be connected simultaneously, only one can be active. If computer video is selected, COMPUTER AUDIO is active. If NTSC/PAL/SECAM/S-Video video is being viewed, AUDIO is active.

If your TV audio source outputs only monaural audio, your Desktop Projector will provide simulated stereo audio. Connect the audio source to the left AUDIO port.

2-12Chapter Two