Proxima ASA 4100/4200 manual Special Configurations

NOTE: If you turn the projector off while the computer is running, the external monitor will go blank. This is normal. Just turn the projector on again and the monitor display will return.

Notebooks

NOTE: If you are connecting to an Apple PowerBook, attach the Mac - VGA cable adapter to the computer’s Video Out port (or video adapter cable).

1Plug the COMPUTER end of the VGA Video cable into the notebook’s VGA Out port or into the Mac - VGA cable adapter (Macintosh only).

2Plug the end of the VGA Video cable with the large round collar into the COMPUTER 1 IN port on the projector.

3Connect your audio source to the COMPUTER 1 AUDIO inputs on the projector.

4Turn on the projector and press the key.

Special Configurations

If your computer has an internal monitor but no external video capability (such as the Macintosh Performa 575, PowerMac 5200, and certain PowerBooks), you need a video adapter card in order to attach the DP4100/ 4200.

Setup for a third-party adapter is identical to the procedures outlined in the Quick Start section above. Contact your dealer, Proxima Customer Service, or a third-party supplier for more information about an appropriate video adapter.

1-4Chapter One