Proxima ASA 4100/4200 manual Connecting Notebook Computers

1Unplug the Macintosh monitor cable from the computer.

2Plug the end of the supplied VGA video cable with the large round collar into the COMPUTER 1 IN port on the projector. Attach the VGA end of the Mac - VGA cable adapter to the other end of the VGA video cable.

3Plug the Mac end of the Mac - VGA cable adapter into the Macintosh video port.

4Connect the audio source to the projector's COMPUTER AUDIO 1 ports.

NOTE: If you are using a second computer video or audio source, plug their

outputs into the COMPUTER 2 IN and COMPUTER 2 AUDIO connectors.

Use the VGA - Mac monitor adapter and your existing monitor cable to connect the projector to a separate computer monitor, so you can view computer video on the projector screen and the monitor at the same time.

NOTE: The DP4100/4200 only supports the Multi-Sync standard as separate

monitors for Macintosh desktop computers.

5To project and view the monitor at the same time, plug the monitor cable into the Mac end of the VGA - Mac monitor adapter.

6Plug the VGA end of the VGA - Mac monitor adapter into the MONITOR OUT port on the projector.

7Turn the projector on and press the key.

NOTE: An external monitor is not required to use the DP4100/4200.

Connecting Notebook Computers

Use the appropriate cable and adapter to connect your portable computer to the projector.

To VIDEO

OUT Port

MAC - VGA

Adapter

Figure 2-12Laptop connections

VGA Cable

To COMPUTER 1

IN Port

Setting Up the Desktop Projector™ 4100/4200 2-9