MODEL 2100 OVERHEAD PROJECTOR
LAMP MANAGEMENT SYSTEM (Lamp Indicator)
Pertains only to models equipped with lamp indicators. (2130/4130 - No holes, opaque)
NOTE
When the projector is turned on, the red X will momentarily light. This is a characteristic of the projector.
The Lamp Indicator indicates status of projection lamp as defined on the following labels:
METHOD 1
A red X will appear on the lamp symbol when that lamp is burned out. Switch to the standby lamp. The X will continue to light until the defective lamp is changed.
METHOD 2
A red X will appear between the two lamp symbols when a lamp is burned out. Switch to the standby lamp. The X will continue to light until the defective lamp is changed.
NOTE
The Overhead Projector must remain on for 2 to 3 minutes after a lamp burns out. This will allow the fan to cool the
9/92 |