Onkyo TXSR307 Basic Operations, Basic AV receiver Operation, Select a listening mode and enjoy

Basic Operations

Basic AV receiver Operation

SPEAKERS A/B MASTER VOLUME

Input selector

INPUT SELECTOR

RECEIVER

VOL q, w

SP A/B

1

AV receiver	Remote
	controller

Use the AV receiver’s input selector buttons to select an input source.

To select an input source with the remote controller. Press the [RECEIVER] button, and then press its INPUT SELECTOR buttons.

2

AV receiver	Remote
	controller

To turn the speakers on or off, use the AV receiver’s SPEAKERS

[A]and [B] buttons, or use the remote controller’s [SP A/B] button.

Pressing the remote controller’s [SP A/B] button cycles through the following settings:

Speaker Set A→Speaker Set A&B→Speaker Set B→Off

↑

Note that while speaker set B is on, speaker set A is reduced to 2.1-channel playback.

See page 13 for more information about speaker sets A and B.

3	Start playback on the source component.
	To watch a BD, DVD, or other video source, on your TV, select the video input
	that’s connected to the AV receiver’s HDMI OUT, COMPONENT VIDEO
	OUT, or MONITOR OUT.
	On some DVD/BD players, you may need to change the digital or HDMI audio
	output settings.

4	AV receiver	Remote
		controller

To adjust the volume, use the MASTER VOLUME control or the remote controller’s VOL [q]/[w] button.

Since the AV receiver is designed for home theaters, it has a wide volume range for precise adjustment. The volume can be set to Min, 1 through 79, or Max.

5	Select a listening mode and enjoy!
	See “Using the Listening Modes” on page 49.

38