Rackmount Solutions Enterprise Series manual Introduction, Important Safety Instructions

Page 3

English

INTRODUCTION

￿

Thank you for purchasing a MINUTEMAN power protection product. It has been designed and manufactured to provide many years of trouble free service.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS !

Please read the manual before installing your Enterprise Series UPS. It provides the information that should be followed during installation and maintenance of the UPS and the batteries allowing you to correctly set up your system for the maximum safety and performance.

Included is information on customer support and factory service if it is required. If you experience a problem with the UPS please refer to the Troubleshooting guide in this manual to correct the problem or collect enough information so that the MINUTEMAN Technical Support Department can rapidly assist you.

NOTICE: This equipment has been tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Subpart J

of Part 15 of FCC Rules and the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference of the Canadian Department of

Communications. These limits are designed to provide reasonable protection against such interference in a residential installation. This equipment generates and uses radio frequency and if not installed and used properly, that is, in strict accordance with the manufacturer's instructions, this equipment may cause interference to radio and television reception. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

nRe-orient the receiving antenna

nRelocate the computer with respect to the receiver

nMove the computer away from the receiver

nPlug the computer into a different outlet so that the computer and receiver are on different branch circuits.

nShielded communications interface cables must be used with this product

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Receiving Inspection

After removing your MINUTEMAN UPS from it's carton, it should be inspected for damage that may have occurred in shipping. Immediately notify the carrier and place of purchase if any damage is found. Warranty claims for damage caused by the carrier will not be honored.

2

Image 3
Contents Page Table of Contents Introduction Important Safety InstructionsPara Systems Life Support Policy Front Panel Controls and IndicatorsInstallation Placement InstallationInstallation English Connecting to AN AC Source Computer Interface Connection OptionalTELEPHONE/NETWORK Surge Protection Connection Optional Turning the Unit ON/OFF Charging the BatteryConnecting Your Equipment OperationAlarms DIP Switch SettingsTroubleshooting Replacing the Battery Replacing the BatteryBattery Replacement Procedure If the UPS Requires Service Obtaining Service500VA 750VA 1100VA 1500VA 2300VA 3200 VA SpecificationsFunction Factory Default User Choices Description SettingsCustomized Output Receptacle Panels Limited Product Warranty Limited Product WarrantyDeclaration of Conformity English