Operator’s Guide
3M™ Micro Professional Projector MPro110
mWarning
To reduce the risk associated with hazardous voltage:
•Do not modify this product in any way. Use only 3M approved replacement components.
•Do not attempt to service this projector other than battery replacement. There are no user serviceable parts other than the battery. Service to be performed only by a
•Do not use the wall power supply in a wet environment.
•Do not use with a damaged wall power supply. Replace damaged part prior to use.
To reduce the risk associated with fire and explosion:
•Do not immerse the projector or battery in any liquid or allow either to get wet.
•Use only wall power supply and
•Do not disassemble, short or expose the battery to high temperature.
•Do not overcharge or rapidly discharge the battery.
•Do not dispose of the battery by incineration or fire.
•Do not operate this projector in any environment above 100°F (38°C).
•Do not expose the projector or battery to direct sunlight in a closed space such as a vehicle.
To reduce the risks associated with driver distraction in a moving motor vehicle:
•Do not use this projector in a moving motor vehicle.
mCaution
To reduce the risk associated with environmental contamination:
•Dispose of all system components in accordance with applicable government regulations.
To reduce the risks associated with LED visible bright light:
•Do not stare directly into the LED light beam.
To reduce the risks associated with tripping and falling:
•Position the charging cord and data cables so that they can not be tripped over.
SAVE THESE INSTRUCTIONS
4 | © 2008 3M. All Rights Reserved. |