3M MPro110 manual Operating Instructions, Connecting to a Video Source

Page 10

Operator’s Guide

3M™ Micro Professional Projector MPro110

Operating Instructions

Connecting to a Video Source

There are many devices that output video signals: digital cameras, video phones, and portable video players. The 3M MPro110 can project the video from these devices using its video port.

(1)Connect the included video cable to the projector (2) Connect the video cable to the video source’s cable or the video output port.

NOTE: If the two cables have the same connector on the end, use the RCA adapter to connect the two cables.

10	© 2008 3M. All Rights Reserved.

Image 10

Contents 3M Micro Professional Projector Contents Intended Use Statement Safety InformationTrademarks and Copyrights To reduce the risk associated with fire and explosion To reduce the risk associated with hazardous voltageTo reduce the risks associated with tripping and falling Safety Labels FCC Statement Class BWeee Statement RoHS StatementPackage Contents PartsTo reduce the risk associated with explosion Install BatteryGetting Started To reduce the risk of environmental contaminationCharge the Battery Connecting to a Video Source Operating InstructionsPowering On Connecting to a Computer Video SourcePowering Off Image Size Focus AdjustmentCleaning Projector Important NotesTroubleshooting Problem Cause SolutionDescription Specification SpecificationsProjector Replacement Parts / Accessories NK03-S005 Rechargeable Lithium-Ion BatterySupported Computer Signals DescriptionLimited Warranty Operator’s Guide What 3M Will Do To Correct Problems Page Projection Systems 3M Austin Center