3M MPro110 manual Getting Started, Install Battery, To reduce the risk associated with explosion

Page 8

Operator’s Guide

3M™ Micro Professional Projector MPro110

Getting Started

Install Battery

The 3M MPro110 comes with a rechargeable Lithium-Ion (Li-Ion) battery. The battery should be charged before using the projector with the battery.

Important Note: Switch projector OFF and disconnect all cables before installing the

battery. Use only the 3M-specified battery: 78-6969-9974-3.

To install the battery: remove screw, slide the back cover off, insert the battery, and reinstall the cover.

mCaution

To reduce the risk associated with explosion:

•Only replace the battery with the 3M approved battery.

To reduce the risk of environmental contamination:

•Dispose of used battery according to applicable local, state, and federal regulations.

8	© 2008 3M. All Rights Reserved.

Image 8

Contents 3M Micro Professional Projector Contents Trademarks and Copyrights Safety InformationIntended Use Statement To reduce the risks associated with tripping and falling To reduce the risk associated with hazardous voltageTo reduce the risk associated with fire and explosion Safety Labels FCC Statement Class BWeee Statement RoHS StatementPackage Contents PartsInstall Battery Getting StartedTo reduce the risk associated with explosion To reduce the risk of environmental contaminationCharge the Battery Connecting to a Video Source Operating InstructionsPowering Off Connecting to a Computer Video SourcePowering On Focus Adjustment Cleaning ProjectorImage Size Important NotesTroubleshooting Problem Cause SolutionProjector SpecificationsDescription Specification NK03-S005 Rechargeable Lithium-Ion Battery Supported Computer SignalsReplacement Parts / Accessories DescriptionLimited Warranty Operator’s Guide What 3M Will Do To Correct Problems Page Projection Systems 3M Austin Center