3M MPro110 manual Charge the Battery

Page 9

3M™ Micro Professional Projector MPro110

Charge the Battery

The 3M MPro110 comes with a battery charger/AC adapter. Use the battery charger/AC adapter to power the projector when the battery is not charged or installed and to charge the battery. When the battery needs charging, the image will turn black and the Power LED will flash red.

To charge the battery: (1) Turn the power switch OFF. (2) Connect the battery charger/AC adapter to the projector’s DC in. (3) Plug the battery charger/AC adapter into an electrical outlet. (4) The charge LED lights orange while the battery is charging. The battery will be fully charged in about 2 hours. (5) Once charging is complete, the charge LED will turn off.

Operator’s Guide

Note: The battery will not charge when the power switch is in the ON position. Turn the power switch OFF to charge battery.

© 2008 3M. All Rights Reserved.

9

Image 9

Contents 3M Micro Professional Projector Contents Safety Information Intended Use StatementTrademarks and Copyrights To reduce the risk associated with hazardous voltage To reduce the risk associated with fire and explosionTo reduce the risks associated with tripping and falling FCC Statement Class B Safety LabelsRoHS Statement Weee StatementParts Package ContentsGetting Started Install BatteryTo reduce the risk associated with explosion To reduce the risk of environmental contaminationCharge the Battery Operating Instructions Connecting to a Video SourceConnecting to a Computer Video Source Powering OnPowering Off Cleaning Projector Focus AdjustmentImage Size Important NotesProblem Cause Solution TroubleshootingSpecifications Description SpecificationProjector Supported Computer Signals NK03-S005 Rechargeable Lithium-Ion BatteryReplacement Parts / Accessories DescriptionLimited Warranty Operator’s Guide What 3M Will Do To Correct Problems Page Projection Systems 3M Austin Center