3M S10 manual Input Menu, Color Space, Video, Frame Lock

Page 27

Multifunctional Settings (continued)

INPUT Menu

With the INPUT menu, the items shown in the table below can be performed.

Perform each operation in accordance with the instructions in the table below.

MENU

 

 

MAIN

COLOR SPACE

AUTO

PICTURE-1

COMPONENT

COMPONENT

PICTURE-2

VIDEO

AUTO

INPUT

FRAME LOCK

TURN ON

AUTO

3D-YCS

NORMAL

SCREEN

VIDEO NR

LOW

OPTION

PROGRESSIVE

TURN OFF

 

INFORMATION

 

: SELECT

 

 

Item

 

 

 

 

Description

 

 

 

 

 

Select a Color Space Mode:

 

 

 

 

 

 

AUTO

RGB

SMPTE240

REC709

REC601

 

• This item can be selected only at a RGB input or a COMPONENT VIDEO

COLOR SPACE

input.

 

 

 

 

 

 

 

 

When the AUTO is selected, the optimum mode is automatically selected. However, it may not work well at some signals. In such a case, select the SMPTE240 or REC709 for HDTV signal.

Select a Function of COMPONENT VIDEO Jacks:

COMPONENT SCART RGB

COMPONENT • When the SCART RGB is selected, the component video jacks function as ports for a RGB input with a SCART cable. Refer to the section “Signal Connectors” of “TECHNICAL”.

Select a Signal Type Mode:

 

 

 

 

AUTO

NTSC

PAL

SECAM

 

NTSC 4.43

M-PAL

 

N-PAL

 

This item performs only at a VIDEO input or a S-VIDEO input. For a COMPONENT VIDEO input, although this item is ineffective, the signal type is

VIDEO

identified automatically even if the AUTO is not selected.

Selecting the AUTO automatically selects the optimum mode. However, it may not work well at a PAL60 signal and some other signals. If the picture becomes unstable (ex. a irregular picture, color lack), please select the mode depending on the input signal.

The AUTO operation requires approximately 10 seconds.

Select the Frame Lock Mode:

TURN ON TURN OFF

• This function performs only at a RGB input with vertical frequency of 48 to 72

FRAME LOCK

Hz.

• When the TURN ON is selected, a moving picture is displayed more smoothly.

• This function may cause a certain degradation of the picture. In such a case, please select the TURN OFF.

Select a 3D-YCS mode:

STILL IMAGE NORMAL TURN OFF

• This function performs only at a VIDEO input of NTSC 3.58.

3D-YCS• NORMAL is the mode for images with a lot of motions like movies, and STILL IMAGE is the mode for images with few motions or completely still ones like slides.

• When this function performs, the VIDEO NR function is ineffective.

27

Image 27
Contents S10 Multimedia Projector Contents Preparation Projector FeaturesSlowly turn the projector so that the top is facing up Part NamesProjector Attaching The BaseProjector To adjust the keystoneRemote Control Arrangement Setting UpTwisting the elevator feet by hand Adjusting The Projectors ElevatorAdjust the height of the projector by As necessary, you can also finelyConnecting Your Devices AUDIO-L AUDIO-R G B R Connecting to a computerConnecting Power Supply Putting Batteries Remote ControlRemove Battery cover Close Battery coverOperating The Remote Control Remote control Power ON/OFFTurning On The Power Make sure that the power cord isUse the focus ring to focus the picture Selecting An Input SignalSelecting a RGB signal Use the zoom ring to adjust the screen SizeSwitch the power switch to O OFF Turning Off The PowerAdjusting The Volume OperatingTemporarily Muting The Sound Adjusting The Position Use Buttons to adjust PositionPress the Position button Correcting Keystone Distortions Using The Automatic Adjustment FeaturePress the Magnify on button Using The Magnify FeatureUse Buttons to adjust the zoom Level Freezing The ScreenSignal Searching Selecting The Aspect RatioTemporarily Blanking The Screen Using The Menu Functions Multifunctional SettingsMain Menu Picture 1 Menu LOAD4 Load/Save a SettingReset the PICTURE-1 Menu Items Picture 1 MenuSize PhasePicture 2 Menu PositionFrame Lock Input MenuColor Space VideoS2-ASPECT Input MenuVideo NR InformationAdjust Auto MenuSearch Screen Menu Start UPMessage Lamp Time VolumeOption Menu Screen TypeLamp Replacing The Lamp Reset the filter timer Air FilterCaring For The Air Filter Filter cover Replacing The Air FilterHold the release buttons of the air Filter, while pulling down itCaring For The Lens Caring For The Cabinet And Remote ControlOther Care Caring For The Inside Of The ProjectorRelated Messages TroubleshootingRelated Messages Power Lamp Temp Description Regarding The Indicator LampsIndicator Regarding The Indicator LampsPhenomena That May Easily Be Mistaken For Machine Defects Phenomena That May Easily Be Mistaken For Machine Defects Video Input Ports SpecificationsSpecification RGB Input Ports Audio PortsNot Included with Basic Packet ………………………………… Part Number AccessoriesAccessories ……………………………………………………… Part Number How to OrderDN00571 S10OGENG

S10 specifications

The 3M S10 is a state-of-the-art personal safety device designed to enhance worker safety across various industrial settings. This innovative product seamlessly combines advanced technology with ergonomic design to provide users with reliable protection and comfort during their daily tasks.

One of the standout features of the 3M S10 is its advanced respiratory protection capabilities. It employs a powerful filtration system that effectively captures airborne particles, gases, and vapors, ensuring that workers are shielded from harmful contaminants. The S10 is equipped with a P100 filter that offers a high level of filtration efficiency, capturing at least 99.97% of airborne particles, including dust, mist, and fumes.

In addition to its robust filtration, the 3M S10 utilizes Smart Sensor technology. This feature monitors the user’s environment and adjusts the airflow accordingly, providing a continuous supply of clean air even in fluctuating conditions. The smart sensor also enhances battery life by optimizing energy consumption, allowing for prolonged use in the field.

The S10 is designed with user comfort in mind. Its lightweight construction and adjustable head straps ensure a secure yet comfortable fit for extended wear. The device features a low-profile design that does not obstruct peripheral vision, making it suitable for tasks that require precision and attention to detail. Additionally, the interchangeable facepiece sizes accommodate various facial shapes, promoting a better seal and reducing the risk of leakage.

Another key characteristic of the 3M S10 is its user-friendly interface. The integrated digital display provides real-time feedback on battery life, filter status, and airflow levels, enabling users to monitor their equipment status easily. This feature reduces downtime by ensuring that workers can quickly identify when maintenance is necessary.

Lastly, the durable construction of the S10 ensures it can withstand harsh working environments. It is made from robust materials that resist wear and tear, making it suitable for industries such as construction, manufacturing, and chemical processing. Overall, the 3M S10 is a versatile and reliable safety device that effectively combines advanced technology with practical features, safeguarding workers while enhancing their operational efficiency.