3M S10 manual Caring For The Air Filter, Reset the filter timer

Page 34

Air Filter

WARNING • Please carefully read the “Product Safety Guide”.

•Before replacing the air filter, make sure the power switch is off and the power cable is not plugged in.

•Use the air filter of the specified type only. See the section “ACCESSORIES”.

•Do not use the projector with the air filter and filter cover removed. The use without

the air filter could result in damage.

CAUTION • Do not reset the filter timer without cleaning or replacing the air filter.

•If the air filter becomes clogged by dust or the like, internal temperature rises and could cause malfunction. The power is automatically turned off in order to prevent the projector from overheating internally.

•When you replace the lamp, please replace also the air filter. The air filter may be attached when you buy a replacement lamp for this projector. Please ask your dealer.

Caring For The Air Filter

The air filter should be cleaned about every 100 hours. If the indicators or a message prompts you to clean the air filter (see the section “Related Messages” and “Regarding The Indicator Lamps”), clean the air filter as soon as possible. If the air filter becomes clogged by dust or the like, internal temperature rises and could cause malfunction.

1 Turn off the projector, and unplug the power cord.

2

After making sure that the projector has

cooled adequately, remove the filter

 

cover. Hold the release buttons ofthe

 

filter cover, while pulling up it.

 

 

 

Hold the release buttons of the air filter,

3

 

while pulling down it.

 

Apply a vacum cleaner to the air filter

4

 

and the filter cover to clean.

 

 

 

 

 

Replace the air filter and the filter cover.

5

 

 

Filter cover

Release buttons Release buttons

Air filter

6 Reset the filter timer.

(1)Turn on the projector. While the projector running, press the MENU button to open the menu.

(2)Choose the “OPTION” on the menu using the / button, then press the button or ENTER button.

(3)Choose the “FILTER TIME” using the / button, then press and hold the

button of projector or the RESET button of remote control for 3 seconds.

(4)Choose the “RESET” using the button.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents S10 Multimedia Projector Contents Projector Features PreparationAttaching The Base Part NamesProjector Slowly turn the projector so that the top is facing upTo adjust the keystone ProjectorRemote Control Setting Up ArrangementAs necessary, you can also finely Adjusting The Projectors ElevatorAdjust the height of the projector by Twisting the elevator feet by handConnecting Your Devices Connecting to a computer AUDIO-L AUDIO-R G B RConnecting Power Supply Close Battery cover Remote ControlRemove Battery cover Putting BatteriesOperating The Remote Control Make sure that the power cord is Power ON/OFFTurning On The Power Remote controlUse the zoom ring to adjust the screen Size Selecting An Input SignalSelecting a RGB signal Use the focus ring to focus the pictureTurning Off The Power Switch the power switch to O OFFOperating Adjusting The VolumeTemporarily Muting The Sound Use Buttons to adjust Position Adjusting The PositionPress the Position button Using The Automatic Adjustment Feature Correcting Keystone DistortionsFreezing The Screen Using The Magnify FeatureUse Buttons to adjust the zoom Level Press the Magnify on buttonSelecting The Aspect Ratio Signal SearchingTemporarily Blanking The Screen Multifunctional Settings Using The Menu FunctionsMain Menu Picture 1 Menu Picture 1 Menu Load/Save a SettingReset the PICTURE-1 Menu Items LOAD4Position PhasePicture 2 Menu SizeVideo Input MenuColor Space Frame LockInformation Input MenuVideo NR S2-ASPECTAuto Menu AdjustSearch Start UP Screen MenuMessage Screen Type VolumeOption Menu Lamp TimeLamp Replacing The Lamp Air Filter Reset the filter timerCaring For The Air Filter Filter, while pulling down it Replacing The Air FilterHold the release buttons of the air Filter coverCaring For The Inside Of The Projector Caring For The Cabinet And Remote ControlOther Care Caring For The LensTroubleshooting Related MessagesRelated Messages Regarding The Indicator Lamps Power Lamp Temp DescriptionRegarding The Indicator Lamps IndicatorPhenomena That May Easily Be Mistaken For Machine Defects Phenomena That May Easily Be Mistaken For Machine Defects RGB Input Ports Audio Ports SpecificationsSpecification Video Input PortsHow to Order AccessoriesAccessories ……………………………………………………… Part Number Not Included with Basic Packet ………………………………… Part NumberDN00571 S10OGENG

S10 specifications

The 3M S10 is a state-of-the-art personal safety device designed to enhance worker safety across various industrial settings. This innovative product seamlessly combines advanced technology with ergonomic design to provide users with reliable protection and comfort during their daily tasks.

One of the standout features of the 3M S10 is its advanced respiratory protection capabilities. It employs a powerful filtration system that effectively captures airborne particles, gases, and vapors, ensuring that workers are shielded from harmful contaminants. The S10 is equipped with a P100 filter that offers a high level of filtration efficiency, capturing at least 99.97% of airborne particles, including dust, mist, and fumes.

In addition to its robust filtration, the 3M S10 utilizes Smart Sensor technology. This feature monitors the user’s environment and adjusts the airflow accordingly, providing a continuous supply of clean air even in fluctuating conditions. The smart sensor also enhances battery life by optimizing energy consumption, allowing for prolonged use in the field.

The S10 is designed with user comfort in mind. Its lightweight construction and adjustable head straps ensure a secure yet comfortable fit for extended wear. The device features a low-profile design that does not obstruct peripheral vision, making it suitable for tasks that require precision and attention to detail. Additionally, the interchangeable facepiece sizes accommodate various facial shapes, promoting a better seal and reducing the risk of leakage.

Another key characteristic of the 3M S10 is its user-friendly interface. The integrated digital display provides real-time feedback on battery life, filter status, and airflow levels, enabling users to monitor their equipment status easily. This feature reduces downtime by ensuring that workers can quickly identify when maintenance is necessary.

Lastly, the durable construction of the S10 ensures it can withstand harsh working environments. It is made from robust materials that resist wear and tear, making it suitable for industries such as construction, manufacturing, and chemical processing. Overall, the 3M S10 is a versatile and reliable safety device that effectively combines advanced technology with practical features, safeguarding workers while enhancing their operational efficiency.
Top Page Image Contents