3M S10 manual Phenomena That May Easily Be Mistaken For Machine Defects

Page 41

Troubleshooting (continued)

Phenomena That May Easily Be Mistaken For Machine Defects

WARNINGPlease carefully read the “Product Safety Guide”.

Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur.

NOTE • Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and such do not constitute or imply a machine defect.

Before requesting repair, please check in accordance with the following chart. If the situation cannot be corrected, then contact your dealer.

Phenomenon

Cases not involving a machine defect,

Reference

and Items to be confirmed

pages

 

 

 

 

 

The main power source is not ON.

 

 

Turn on the main power.

11,14

 

 

 

The electrical power cord is not plugged in.

 

 

Power does not

Correctly connect the power cord.

 

 

 

come ON.

The main power source has been interrupted during operation,

 

 

such as by a power outage (blackout), etc.

 

 

Be sure to press the “” (power OFF) side of the main power switch,

14

 

and leave this OFF for at least 20 minutes. After the unit has

 

 

sufficiently cooled down, turn ON the power source.

 

 

 

 

Neither sounds

The input changeover settings are mismatched.

15

Select the input signal, and correct the settings.

nor pictures are

 

 

 

No signal is being inputted.

 

outputted.

10

 

Correctly connect the connection cables.

 

 

The electrical wiring to this unit is not correctly connected.

10

 

Correctly connect the connection cables.

Pictures are

 

 

 

The volume setting has been set at (or adjusted to) an

 

displayed,

17

extremely low level.

but no sounds

Adjust the VOLUME setting to a higher level.

 

are heard.

 

 

 

 

The MUTE mode is the current setting.

17

 

Press the MUTE button to release (change) the MUTE mode setting.

 

 

 

 

 

 

The electrical wiring to this unit is not correctly connected.

10

 

Correctly connect the connection cables.

Sounds are

 

 

 

The brightness setting has been set at (or adjusted to) an

 

heard,

23

extremely low level.

but no pictures

Adjust the BRIGHT setting to a brighter level.

 

are displayed.

 

 

 

 

The lens cap has not been removed.

4,14

 

Remove the lens cap.

 

 

 

 

 

Colors have a

Color settings are not correctly adjusted.

 

faded- out

 

Perform picture adjustments by changing the COLOR BAL R,

24

appearance, or

COLOR BAL G, COLOR BAL B, COLOR, and/or the TINT settings,

Color tone is

 

etc.

 

poor.

 

 

 

 

 

 

41

Image 41
Contents S10 Multimedia Projector Contents Preparation Projector FeaturesProjector Part NamesAttaching The Base Slowly turn the projector so that the top is facing upProjector To adjust the keystoneRemote Control Arrangement Setting UpAdjust the height of the projector by Adjusting The Projectors ElevatorAs necessary, you can also finely Twisting the elevator feet by handConnecting Your Devices AUDIO-L AUDIO-R G B R Connecting to a computerConnecting Power Supply Remove Battery cover Remote ControlClose Battery cover Putting BatteriesOperating The Remote Control Turning On The Power Power ON/OFFMake sure that the power cord is Remote controlSelecting a RGB signal Selecting An Input SignalUse the zoom ring to adjust the screen Size Use the focus ring to focus the pictureSwitch the power switch to O OFF Turning Off The PowerTemporarily Muting The Sound Adjusting The VolumeOperating Press the Position button Adjusting The PositionUse Buttons to adjust Position Correcting Keystone Distortions Using The Automatic Adjustment FeatureUse Buttons to adjust the zoom Level Using The Magnify FeatureFreezing The Screen Press the Magnify on buttonTemporarily Blanking The Screen Signal SearchingSelecting The Aspect Ratio Using The Menu Functions Multifunctional SettingsMain Menu Picture 1 Menu Reset the PICTURE-1 Menu Items Load/Save a SettingPicture 1 Menu LOAD4Picture 2 Menu PhasePosition SizeColor Space Input MenuVideo Frame LockVideo NR Input MenuInformation S2-ASPECTSearch AdjustAuto Menu Message Screen MenuStart UP Option Menu VolumeScreen Type Lamp TimeLamp Replacing The Lamp Caring For The Air Filter Reset the filter timerAir Filter Hold the release buttons of the air Replacing The Air FilterFilter, while pulling down it Filter coverOther Care Caring For The Cabinet And Remote ControlCaring For The Inside Of The Projector Caring For The LensRelated Messages TroubleshootingRelated Messages Power Lamp Temp Description Regarding The Indicator LampsIndicator Regarding The Indicator LampsPhenomena That May Easily Be Mistaken For Machine Defects Phenomena That May Easily Be Mistaken For Machine Defects Specification SpecificationsRGB Input Ports Audio Ports Video Input PortsAccessories ……………………………………………………… Part Number AccessoriesHow to Order Not Included with Basic Packet ………………………………… Part NumberDN00571 S10OGENG

S10 specifications

The 3M S10 is a state-of-the-art personal safety device designed to enhance worker safety across various industrial settings. This innovative product seamlessly combines advanced technology with ergonomic design to provide users with reliable protection and comfort during their daily tasks.

One of the standout features of the 3M S10 is its advanced respiratory protection capabilities. It employs a powerful filtration system that effectively captures airborne particles, gases, and vapors, ensuring that workers are shielded from harmful contaminants. The S10 is equipped with a P100 filter that offers a high level of filtration efficiency, capturing at least 99.97% of airborne particles, including dust, mist, and fumes.

In addition to its robust filtration, the 3M S10 utilizes Smart Sensor technology. This feature monitors the user’s environment and adjusts the airflow accordingly, providing a continuous supply of clean air even in fluctuating conditions. The smart sensor also enhances battery life by optimizing energy consumption, allowing for prolonged use in the field.

The S10 is designed with user comfort in mind. Its lightweight construction and adjustable head straps ensure a secure yet comfortable fit for extended wear. The device features a low-profile design that does not obstruct peripheral vision, making it suitable for tasks that require precision and attention to detail. Additionally, the interchangeable facepiece sizes accommodate various facial shapes, promoting a better seal and reducing the risk of leakage.

Another key characteristic of the 3M S10 is its user-friendly interface. The integrated digital display provides real-time feedback on battery life, filter status, and airflow levels, enabling users to monitor their equipment status easily. This feature reduces downtime by ensuring that workers can quickly identify when maintenance is necessary.

Lastly, the durable construction of the S10 ensures it can withstand harsh working environments. It is made from robust materials that resist wear and tear, making it suitable for industries such as construction, manufacturing, and chemical processing. Overall, the 3M S10 is a versatile and reliable safety device that effectively combines advanced technology with practical features, safeguarding workers while enhancing their operational efficiency.