Operating
Searching an input signal
Press the SEARCH button on the remote control.
1. The projector will begin to check its input ports in order |
| STANDBY/ON |
VIDEO | RGB SEARCH | |
to fi nd any input signals. | - + | AUTO BLANK |
ASPECT | ||
Then when an input is found, the projector will stop |
|
|
searching and display the image. If no signal is found, |
|
|
the projector will return to the state selected before the |
|
|
operation. |
|
|
RGB |
|
|
Selecting an aspect ratio
1. Press the ASPECT button on the remote control.
Each time you press the button, the projector switches the modes for aspect ratio in turn.
At a RGB signal
NORMAL 4:3 16:9 | VIDEO | RGB SEARCH STANDBY/ON |
| ASPECT | AUTO BLANK |
| - + |
|
At a video signal /no signal 4:3 16:9
MAGNIFYVOLUME
●The NORMAL mode keeps the original aspect ratio of the signal.
●At a HDTV component video signal of 1125i (1080i) or 750p (720p), only 16:9 mode can be selected.
●Performing the automatic adjustment initializes the aspect ratio setting.
Adjusting the zoom (magnifying power)
MUTE
1. Press the ZOOM +/- button on the remote control. A dialog will appear on the screen to aid you in
adjusting the zoom.
OFF |
|
FREEZE | KEYSTONE |
| ZOOM |
- | + |
- + |
|
POSITION | MENU |
2. Use the ZOOM buttons +/- to adjust the zoom.
To close the dialog and complete this operation, don’t perform operation for a few seconds.
Adjusting the focus
1. Use the focus ring to focus on the picture.
19