Multifunctional settings
SETUP menu
With the SETUP menu, items shown in the table below can be performed.
Choose an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.
MENU [RGB] |
| :SELECT |
PICTURE | ZOOM | 100 |
IMAGE | KEYSTONE | +0 |
INPUT | WHISPER | NORMAL |
SETUP | MIRROR | NORMAL |
SCREEN | VOLUME | 16 |
OPTION |
|
|
EASY MENU |
|
|
Item
ZOOM
KEYSTONE
WHISPER
MIRROR
VOLUME
Description
Using the buttons ▲/▼ adjusts the zoom (magnifying power).
Large Small
Using the buttons ▲/▼ corrects the keystone distortion. Upper in the data Lower in the data
•The adjustable range of this function will vary with the type of input signal. At some signals, this function may not work well.
•When the V:INVERT or the H&V:INVERT is selected under the item MIRROR, if the projector screen is inclined or if the projector is angled downward, this function may not work correctly.
•When the zoom adjustment is set to the TELE side, this correction may be excessive. This function should be used with zoom set to WIDE whenever possible.
Using the buttons ▲/▼ turns off/on the whisper mode.
NORMAL WHISPER
•When the WHISPER is selected, acoustic noise and screen brightness are reduced.
Using the buttons ▲/▼ switches the mode for mirror status.
NORMAL H:INVERT V:INVERT H&V:INVERT
Using the buttons ▲/▼ adjusts the volume.
High Low
34