3M S15 manual Other care, Inside of the projector, Caring for the lens

Page 45

Maintenance

Other care

WARNING ► Do not take care of the projector during use or immediately after use. Handling while the projector is in a high temperature could cause a burn and/ or malfunction to the projector. Before operating, make sure that the power switch is off, that the power cord is not plugged in, and that the projector is cool adequately. ►Never try to care for the inside of the projector personally. Doing is so

dangerous.

►Avoid wetting the projector or inserting liquids in the projector. It could result

in a fi re, an electric shock, and/or malfunction to the projector.

Don’t put a container containing water, cleaner or chemicals near the projector.

Don’t use aerosols or sprays.

CAUTION ►Please take right care of the projector according to the following. Incorrect care could cause not only an injury but adverse influence

such as discoloration, peeling paint, etc.

Do not use cleaner or chemicals other than those listed below.

Do not polish or wipe with hard objects.

Inside of the projector

In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year.

Caring for the lens

If the lens is fl awed, soiled or fogged, it could cause deterioration of display quality. Please take care of the lens, being cautious of the handling.

1. Turn the projector off, and unplug the power cord. Allow the projector to cool suffi ciently.

2. After making sure that the projector is cool adequately, lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens

directly with your hand.

Caring for the cabinet and remote control

Incorrect care could have adverse infl uence such as discoloration, peeling paint,

etc.

1. Turn the projector off, and unplug the power cord. Allow the projector to cool suffi ciently.

2. After making sure that the projector is cool adequately, lightly wipe with gauze or a soft cloth.

If soiling is severe, dip soft cloth in water or a neutral cleaner dilute in water, and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.

45

Image 45
Contents Thank you for purchasing this projector About this manualContents About contents of package Projector featuresProjector Part namesRemote control ControlsMagnify Fastening the lens cover PreparationsPutting batteries Using the remote control About the filter cover for bottom-up use Setting up Arrangement At 43 screenAt 169 screen Adjusting the projectors elevator About Plug-and-Play capability Connecting your devicesExamples of connection with a VCR/DVD player Examples of connection with a computerConnecting power supply Turning on the power Power on/offTurning off the power Selecting an input signal Adjusting the volumeOperating Temporarily muting the soundAdjusting the zoom magnifying power Searching an input signalAdjusting the focus Selecting an aspect ratioAdjusting the position Using the automatic adjustment feature At a video signal S-VIDEO · Video Correcting the keystone distortionsUsing the partial magnify feature Freezing the screenTemporarily blanking the screen Using the menu function Multifunctional settingsEnter Advanced Menu Main → Easy MenuDialogs for operation ex. Keystone → Advanced Menu Easy Menu Aspect Zoom Keystone Mode Bright Contrast Color TintEasy Menu Sharpness Whisper Mirror Reset Filter Time Language#3 Custom  #3 Default  #2 Custom #1 Default  #1 Custom  #2 DefaultPicture menu GammaPicture menu High  Middle Custom  LOWSharpness Progressive MY Memory TV  Film  Turn OFFLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1 Image menu Aspect Over Scan Position H Position PhaseImage menu Size Auto Adjust ExecuteInput menu Color Space Video FormatAuto  Ntsc  PAL  Secam Input menu Frame Lock InformationTurn O N  Turn OFF Zoom Keystone Whisper Mirror Volume Setup menuNormal  Whisper Normal  Hinvert  Vinvert  H&VINVERTMenu Position OSD Bright Blank Screen menuStart UP Screen menuMessage Turn on  Turn OFFNo Input is Detected Sync is OUT of Range Option menu Auto Search Auto OFFRGB  S-VIDEO  Video Reset  Cancel Option menuLamp Time Factory Reset ServiceFAN Speed GhostLamp MaintenanceLamp Case of replacement by yourselfAir filter Air filter Other care Caring for the cabinet and remote controlInside of the projector Caring for the lensTime the lamp timer has counted is approaching 2000 hours There is no input signalRelated messages Related messages Internal portion temperature is risingRegarding the indicator lamps It is time to clean the air filter Regarding the indicator lampsCooling fan is not operating There is a possibility that the interior portionPhenomena that may easily be mistaken for machine defects Power switch is not set to the on positionPhenomena that may easily be mistaken for machine defects Audio Specifi cationsSpecifications Accessories Part Number How to OrderNot included with Basic Packet Part Number DN00821-S15OGENG