3M S15 manual Lamp, Case of replacement by yourself

Page 42

Maintenance

Lamp (continued)

When the indicators or a message prompts you to replace the lamp, replace the lamp as soon as possible.

1. Turn the projector off, and unplug the power cord. Allow the lamp to cool for at least 45 minutes.

2. To prepare a new lamp, contact your dealer and tell the lamp type number = 78-6969-9812-5If the projector is mounted on the ceiling, or if the lamp has

broken, also ask the dealer to replace the lamp.

In the case of replacement by yourself,

3.

After making sure that the projector has cooled

Claws of lamp door

 

adequately, slowly turn over the projector, so

 

that the bottom is facing up.

 

4.

Please loosen the screw (marked by arrow). Then,

 

unhook the claws of the lamp door and remove the

 

lamp door.

 

5.

Loosen the 2 screws (marked by arrow) of the lamp,

Screw marked by arrow

and slowly pick up the lamp by the

 

handles.

6.Insert the new lamp, and retighten

rmly two screws that are loosened in the previous process to lock it in place.

Interlocking the 2 tabs of the lamp

Screws marked

7. door to the projector, position the

by arrow

Center

lamp door on the projector, and push the center

point of two claws to fi x the lamp door. Then

point

retighten fi rmly the screw of the lamp door.

of claws

 

8. Slowly turn the projector so that the top is facing up.

Tabs

9. Turn the projector on, and reset the lamp time using the LAMP TIME function of OPTION

menu ( 39)

NOTE • When the lamp has been replaced after the message of "THE POWER WILL TURN OFF AFTER 0hr." is displayed, complete the following operation within 10 minutes of switching power on.

Incorrectly resetting of the lamp timer (resetting without replacement, or neglect of resetting after replacement) will result in incorrect message functions.

42

Image 42
Contents About this manual Thank you for purchasing this projectorContents Projector features About contents of packagePart names ProjectorRemote control ControlsMagnify Preparations Fastening the lens coverPutting batteries Using the remote control About the filter cover for bottom-up use Setting up Arrangement At 43 screenAt 169 screen Adjusting the projectors elevator Connecting your devices About Plug-and-Play capabilityExamples of connection with a computer Examples of connection with a VCR/DVD playerConnecting power supply Power on/off Turning on the powerTurning off the power Operating Adjusting the volumeSelecting an input signal Temporarily muting the soundAdjusting the focus Searching an input signalAdjusting the zoom magnifying power Selecting an aspect ratio At a video signal S-VIDEO · Video Using the automatic adjustment featureAdjusting the position Correcting the keystone distortionsUsing the partial magnify feature Freezing the screenTemporarily blanking the screen Multifunctional settings Using the menu functionAdvanced Menu Main → Easy Menu EnterDialogs for operation ex. Keystone → Advanced Menu Aspect Zoom Keystone Mode Bright Contrast Color Tint Easy MenuSharpness Whisper Mirror Reset Filter Time Language Easy MenuPicture menu #1 Default  #1 Custom  #2 Default#3 Custom  #3 Default  #2 Custom GammaPicture menu High  Middle Custom  LOWSharpness Progressive MY Memory TV  Film  Turn OFFLOAD1  LOAD2  LOAD3  LOAD4 SAVE4 SAVE3  SAVE2  SAVE1 Aspect Over Scan Position H Position Phase Image menuSize Auto Adjust Execute Image menuInput menu Color Space Video FormatAuto  Ntsc  PAL  Secam Input menu Frame Lock InformationTurn O N  Turn OFF Normal  Whisper Setup menuZoom Keystone Whisper Mirror Volume Normal  Hinvert  Vinvert  H&VINVERTScreen menu Menu Position OSD Bright BlankScreen menu Start UPMessage Turn on  Turn OFFNo Input is Detected Sync is OUT of Range Option menu Auto Search Auto OFFRGB  S-VIDEO  Video Reset  Cancel Option menuLamp Time FAN Speed ServiceFactory Reset GhostMaintenance LampCase of replacement by yourself LampAir filter Air filter Inside of the projector Caring for the cabinet and remote controlOther care Caring for the lensTime the lamp timer has counted is approaching 2000 hours There is no input signalRelated messages Internal portion temperature is rising Related messagesRegarding the indicator lamps Cooling fan is not operating Regarding the indicator lampsIt is time to clean the air filter There is a possibility that the interior portionPower switch is not set to the on position Phenomena that may easily be mistaken for machine defectsPhenomena that may easily be mistaken for machine defects Specifi cations AudioSpecifications Accessories Part Number How to OrderNot included with Basic Packet Part Number DN00821-S15OGENG