3M S15 manual Image menu, Aspect Over Scan Position H Position Phase

Multifunctional settings

IMAGE menu

With the IMAGE menu, items shown in the table below can be performed.

Choose an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.

MENU [RGB]		:SELECT
PICTURE	ASPECT	4:3
IMAGE	OVER SCAN	95
INPUT	V POSITION	25
SETUP	H POSITION	142
SCREEN	H PHASE	16
OPTION	H SIZE	1344
EASY MENU	AUTO ADJUST EXECUTE

Item

ASPECT

OVER SCAN

VPOSITION H POSITION

H PHASE

Description

Using the buttons ▲/▼ switches the mode for aspect ratio.

At a RGB signal

4:3  16:9  NORMAL

At a video signal / no signal 4:3  16:9

•The NORMAL mode keeps the original aspect ratio of the signal.

•At a HDTV component video signal of 1125i (1080i) or 750p (720p), this item can’t be chosen.

•Performing the automatic adjustment initializes the aspect ratio setting.

Using the buttons ▲/▼ adjusts the over-scan ratio. Large (It reduces picture)  Small (It magnifi es picture)

•This item can be chosen only at a video signal.

•When this adjustment is too large, certain degradation may appear at the frame area of the picture. In such a case, please adjust small.

•The number displayed on the menu during this adjustment is just for your reference , and might not be exact display ratio.

Using the buttons ▲/▼ adjusts the vertical position.

Up  Down

Using the buttons ▲/▼ adjusts the horizontal position.

Left  Right

Using the buttons ▲/▼ adjusts the horizontal phase to eliminate fl icker.

Right  Left

•This item can be chosen only at a RGB signal or a component video signal (except 525i (480i) and 625i (576i)).

30