3M S15 manual Easy Menu, Aspect Zoom Keystone Mode Bright Contrast Color Tint

Multifunctional settings

EASY MENU

With the EASY MENU, items shown in the table below can be performed.

Choose an item using the cursor buttons ▲/▼ on the projector or remote control. Then perform it referring to the following table.

EASY MENU

ASPECT	4:3
ZOOM	+0
KEYSTONE
	+0
MODE	NORMAL
BRIGHT	+0
CONTRAST	+0
COLOR	+0
TINT	+0
SHRPNESS	+3
WHISPER	NORMAL
MIRROR	NORMAL
RESET
FILTER TIME	0
LANGUAGE	ENGLISH

Go To Advance Menu...

Item

ASPECT

ZOOM

KEYSTONE

MODE

BRIGHT

CONTRAST

COLOR

TINT

Description

Using the buttons ◄/► switches the mode for aspect ratio. See the item ASPECT of section IMAGE menu. (30, 19)

Using the buttons ◄/► adjusts the zoom.

See the item ZOOM of section SETUP menu. (34, 19)

Using the buttons ◄/► corrects the keystone distortion. See the item KEYSTONE of section SETUP menu. (34, 20)

Using the buttons ◄/► switches the mode of picture type. The modes of picture type are combinations of a mode of GAMMA (27) and a mode of COLOR TEMP (28). Choose a suitable mode according to the projected source.

NORMAL  CINEMA  DYNAMIC

NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT)

CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT)

DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT)

•When the combination of GAMMA and COLOR TEMP differs from pre-assigned modes above, the display on the menu for the MODE is “CUSTOM”.

Using the buttons ◄/► adjusts the brightness.

See the item BRIGHT of section PICTURE menu. (27)

Using the buttons ◄/► adjusts the contrast.

See the item CONTRAST of section PICTURE menu. (27)

Using the buttons ◄/► adjusts the strength of whole color. See the item COLOR of section PICTURE menu. (28)

•This item can be chosen only at a video signal.

Using the buttons ◄/► adjusts the tint.

See the item TINT of section PICTURE menu. (28)

•This item can be chosen only at a video signal.

25