LG Electronics 72WX70MF owner manual Network Status, Tips for Network setting

Page 18

18ENTERTAINMENT

ENGLISH

NOTE

yyIf you want to access the Internet directly on your display, the internet connection should always be on.

yyIf you cannot access the Internet, check the network conditions from a PC on your network.

yyWhen you use Network Setting, check the LAN cable or check if DHCP in the router is turned on.

yyIf you do not complete the network settings, the network may not work properly.

Tips for Network setting

yyUse a standard LAN cable with this display. Cat5 or better with a RJ45 connector.

yyMany network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the display to the home network, quickly power off and/or discon- nect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.

yyDepending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP.

yyLG is not responsible for any malfunction of the display and/or the internet connection feature due to communication errors/malfunctions as- sociated with your internet connection, or other connected equipment.

yyLG is not responsible for problems within your internet connection.

yyYou may experience undesired results if the network connection speed does not meet the requirements of the content being accessed.

yySome internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your Internet connection.

yyAny fees charged by an ISP including, without limitation, connection charges are your respon- sibility.

yyA 10 Base-T or 100 Base-TX LAN port is required when using a wired connection to this display. If your internet service does not allow for such a connection, you will not be able to con- nect the display.

yyA DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this display or you may be limited to the number of devices you can connect at the same time. (If your ISP limits sub scription to one device, this display may not be allowed to connect when a PC is already connected.)

yyThe use of a Router may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly.

Network Status

1Press MENU to access the main menus.

2Press the navigation buttons to scroll to NET- WORK and press OK.

3Press the navigation buttons to select Network Status.

4Press OK to check the network status.

5When you are finished, press EXIT.

Option

Description

Setting

Return to the network setting menu.

Test

Test the current network status after

setting the network.

 

Close

Return to the previous menu.

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Monitor Signage Table of Contents Licenses Accessories Remote Control and Batteries Power CordAssembling and Preparing Illuminance sensor IR Receiver Power Indicator Parts and ButtonsConnection Panel Connection panel Portrait Layout Pemnut Not to be UsedA Button Remote ControlVolume Up / Down Number and Alphabet ButtonsReturns to Monitor Selects the Tile ModeNavigation Buttons Scrolls through menus or Viewing from any menuUsing the Monitor Connecting to a PCRGB Connection DVI-D ConnectionHdmi Connection Display Port ConnectionAdjusting the Screen Selecting an Image ModeCustomizing Image Options Adjusting the Sound Selecting an Sound ModeCustomizing PC Display Options Using Additional Options Adjusting Aspect RatioCustomizing Sound Options Just Scan Component Using the Input ListSelecting an input source Display PortConnecting to a Wired Network Select IP Auto Setting or IP Manual SettingEntertainment Tips for Network setting Network StatusConnecting USB Storage Devices Browsing Files Viewing Movies Supported File FormatsEnergy Video Play., Set Video. or Set Audio. Not affect Photo List and Music ListMusic List excluding Movie List Language Menu Description Picture SizeAudio SubtitleExit the Mark Mode Viewing PhotosUsing Photo Options Photo OptionsOption Description Transition Effect Option Display the selected music file Listening to MusicMenu Description Mark all music files on the screenControl playback by using the following buttons Button DescriptionEnergy Saving button Viewing the Contents List DivX VOD Guide DivX VOD RegistrationMedia Using PIP/PBPSelect Movie List or Photo List from My DivX VOD DeregistrationMovie List Settings Customizing SettingsAccessing Main Menus Customizes the generalMaintenance Picture Mode Picture SettingsEnables or disables the luminance maintenance function Mode VividPicture Mode Options Off/High/Low Setting Description Dynamic ContrastDynamic Color Clear WhiteSound Mode Options Press Menu to access the main menusPress the navigation buttons to scroll to the setting or Press the navigation buttons to scroll to Audio and pressAuto off Time SettingsTo prevent overload MinutesOption Settings PC Position Setting Description Tile ModeOption Mode PC SizeProduct/Service Setting Description USB ContentRecovery Info Portrait ModeTile Mode Tile Mode Natural Mode EnglishPosition Top left Bottom left Size Top right Bottom right1920x1080 Network Settings Making Connections Component Connection Not included YyUse a High Speed Hdmi CableConnecting to a USB AV Cvbs ConnectionConnecting to the LAN Daisy Chain Monitors ModeTroubleshooting Problem ResolutionNo image is displayed Audio function does not work Problem Resolution Screen image looks abnormalAfter-image appears on the product Screen color is abnormal Specifications Applicable only for models that support the speakers RGB PC supported mode DTV ModeHDMI,DVI-D,Display Port PC supported mode IR Codes Code Hexa FunctionControlling the Multiple Product Connecting the CableRS-232C Configurations Communication ParameterCommand Reference List HexadecimalEnglish Transmission / Receiving Protocol TransmissionAcknowledgement Energy Saving Command j q To set the Energy Saving function Power Command k aInput Select Command x b Picture Mode Command d x To select the Picture ModeBrightness Command k h Tint Command k j Sharpness Command k kColor Command k Position Command f q Auto Configuration Command j u Position Command f rSize Command f s Balance Command k t To adjust the sound balanceVolume Mute Command k e Bass Command k s Volume Control Command k fSpeaker Command d To control the Volume Mute on/offAcknowledgement Set ID OK/NGData1Data2Data3x On Timer Input Command f u Sleep Time Command f f Power On Delay Command f hAutomatic Standby Command m n Language Command f i To set the language for OSD ISM mode Command j pFail Over Select Command m i To set the Fail Over function Tile ID Command d Reset Command f kTile Mode Command d d DPM Select Command f j Tile H Size Command d gNatural Mode In Tile Mode Command d j Tile V Size Command d h To adjust the Tile Vertical sizeTemperature Value Command d n Command k mKey Command m c OSD Select Command k lElapsed time return Command d l To check the panel used time Serial No.Check Command f y To check the Serial NumbersBacklight Command m g PC Power Control Command d tPC Power Command d s Control the PC power English Model
Top Page Image Contents