62CONTROLLING THE MULTIPLE PRODUCT
ENGLISH
01.Power (Command: k a)
To control the Power On/Off the display.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Off 01 : On
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
*Only when the monitor set is fully powered on, the Acknowledgement signal is returned properly.
*There may be a certain time of delay between the Transmission and Acknowledgement signals.
02.Input Select (Command: x b)
To select the Input Source for display.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data 20: Input (AV)
40:Component
60:RGB
70:
80:
90:HDMI(HDMI1)(DTV) A0: HDMI(HDMI1)(PC) C0: Display Port(DTV)
D0: Display Port(PC)
91:HDMI2/SDI(DTV) A1: HDMI2/SDI(PC)
B0: SuperSign
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
04.Energy Saving (Command: j q) To set the Energy Saving function.
Transmission
[j][q][ ][Set ID][ ][Data][Cr] Data 00: Off
01:Minimum
02:Medium
03. Maximum
04:Auto
05. Screen Off
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
** It may not be supported depending on the model.
05.Picture Mode (Command: d x) To select the Picture Mode.
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
Data 00: Vivid
01:Standard
02. Cinema
03. Sport
04:Game
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
*Some input signals may not be supported depending on the model.
03.Aspect Ratio (Command: k c)
To adjust the screen format.
Transmission
[k][c][ ][Set ID][ ][Data][Cr] Data 01: 4:3
02:16:9
04:Zoom
(AV, Component, HDMI/
09:Just scan (720p or more)
(Component, HDMI/
(AV, Component, HDMI/
*Available data types differ depending on the input signal. For more information, see the aspect ratio section of the owner's manual.
*The aspect ratio may differ depending on the model's input configuration.
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
06.Contrast (Command: k g) To adjust the screen contrast.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Contrast 0 to 100 Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]