LG Electronics 72WX70MF owner manual Command k m, Key Command m c, Temperature Value Command d n

Page 71

							CONTROLLING THE MULTIPLE PRODUCT 71
49. FAN Fault Check (Command: d w)						51. Remote Controller Lock/ Key Lock
	To check the fan errors.						(Command: k m)
						When the remote control and front keys are locked in
	Transmission
						standby mode, the power cannot be turned on using

	[d][w][ ][Set ID][ ][Data][Cr]
						the remote control or front power button.
	Data FF: Read the status
							Transmission

	Acknowledgement						[k][m][ ][Set ID][ ][Data][Cr]

	[w][ ][Set ID][ ][OK/NG][Data][x]
						Data 00: Off (Lock Off)
	Data 00: Fan fault
							01: On (Lock On)
	01: Fan OK					* Display will not be turned on by power on key of
	02: Model without a Fan					remote controller and front panel control keys, if key
	For 72WX70MF, see the following.					is locked on in standby mode.
	[w][ ][Set ID][ ][OK/NG][Data1][Data2][x]						Acknowledgement

ENGLISH

Data1 00: One or more fans are faulty. 01: All fans are OK.

02: The model has no fan.

Data2 00: No fan is faulty (all fans are OK).

01:1 fan is faulty.

02:2 fans are faulty.

03:3 fans are faulty.

04:4 fans are faulty.

05:5 fans are faulty.

06:6 fans are faulty.

[m][ ][Set ID][ ][OK/NG][Data][x]

**It may not be supported depending on the model.

52.Key (Command: m c)

To send a key code of the IR remote control.

Transmission

[m][c][ ][Set ID][ ][Data][Cr]

Data IR_KEY_CODE

Acknowledgement

[c][ ][Set ID][ ][OK/NG][Data][x]

	For a key code, see the IR Code.
50. Temperature Value (Command: d n)	* Some key codes are not supported depending on
To check the inside temperature value.	the model.

Transmission

[d][n][ ][Set ID][ ][Data][Cr]

Data FF: Check the status Acknowledgement

[n][ ][Set ID][ ][OK/NG][Data][x]

[n][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]

*Temperature is displayed in hexadecimal. Up to Data3 are provided as 72WX70MF has 3 temperature sensors.

Data1: Temperature sensor at the exit (top).

Data2: Temperature sensor at the entrance (bottom).

Data3: Temperature sensor at the main board (main PCB).

53.OSD Select (Command: k l)

To select OSD(On Screen Display) on/off.

Transmission

[k][l][ ][Set ID][ ][Data][Cr] Data 00: Off

01:On

Acknowledgement

[l][ ][Set ID][ ][OK/NG][Data][x]

Image 71

Contents Monitor Signage Table of Contents Licenses Assembling and Preparing AccessoriesRemote Control and Batteries Power Cord Connection Panel Connection panel Illuminance sensor IR Receiver Power IndicatorParts and Buttons Pemnut Not to be Used Portrait LayoutNumber and Alphabet Buttons Remote ControlVolume Up / Down A ButtonViewing from any menu Selects the Tile ModeNavigation Buttons Scrolls through menus or Returns to MonitorConnecting to a PC Using the MonitorDVI-D Connection RGB ConnectionDisplay Port Connection Hdmi ConnectionCustomizing Image Options Adjusting the ScreenSelecting an Image Mode Customizing PC Display Options Adjusting the SoundSelecting an Sound Mode Customizing Sound Options Using Additional OptionsAdjusting Aspect Ratio Just Scan Display Port Using the Input ListSelecting an input source ComponentEntertainment Connecting to a Wired NetworkSelect IP Auto Setting or IP Manual Setting Network Status Tips for Network settingConnecting USB Storage Devices Browsing Files Supported File Formats Viewing MoviesEnergy Music List excluding Movie List Video Play., Set Video. or Set Audio.Not affect Photo List and Music List Subtitle Menu Description Picture SizeAudio LanguageViewing Photos Exit the Mark ModeOption Description Using Photo OptionsPhoto Options Transition Effect Option Mark all music files on the screen Listening to MusicMenu Description Display the selected music fileEnergy Saving button Control playback by using the following buttonsButton Description Viewing the Contents List DivX VOD Registration DivX VOD GuideDivX VOD Deregistration Using PIP/PBPSelect Movie List or Photo List from My MediaMovie List Customizes the general Customizing SettingsAccessing Main Menus SettingsMode Vivid Picture SettingsEnables or disables the luminance maintenance function Maintenance Picture ModePicture Mode Options Clear White Setting Description Dynamic ContrastDynamic Color Off/High/LowPress the navigation buttons to scroll to Audio and press Press Menu to access the main menusPress the navigation buttons to scroll to the setting or Sound Mode OptionsMinutes Time SettingsTo prevent overload Auto offOption Settings PC Size Setting Description Tile ModeOption Mode PC PositionInfo Portrait Mode Setting Description USB ContentRecovery Product/ServiceEnglish Tile Mode Tile Mode Natural Mode1920x1080 PositionTop left Bottom left Size Top right Bottom right Network Settings Making Connections Not included YyUse a High Speed Hdmi Cable Component ConnectionAV Cvbs Connection Connecting to a USBConnecting to the LAN Mode Daisy Chain MonitorsNo image is displayed TroubleshootingProblem Resolution After-image appears on the product Audio function does not work Problem ResolutionScreen image looks abnormal Screen color is abnormal Specifications Applicable only for models that support the speakers HDMI,DVI-D,Display Port PC supported mode RGB PC supported modeDTV Mode Code Hexa Function IR CodesCommunication Parameter Connecting the CableRS-232C Configurations Controlling the Multiple ProductHexadecimal Command Reference ListEnglish Acknowledgement Transmission / Receiving ProtocolTransmission Picture Mode Command d x To select the Picture Mode Power Command k aInput Select Command x b Energy Saving Command j q To set the Energy Saving functionColor Command k Position Command f q Brightness Command k h Tint Command k jSharpness Command k k Balance Command k t To adjust the sound balance Position Command f rSize Command f s Auto Configuration Command j uTo control the Volume Mute on/off Bass Command k s Volume Control Command k fSpeaker Command d Volume Mute Command k eAcknowledgement Set ID OK/NGData1Data2Data3x Automatic Standby Command m n On Timer Input Command f u Sleep Time Command f fPower On Delay Command f h Fail Over Select Command m i To set the Fail Over function Language Command f i To set the language for OSDISM mode Command j p Tile Mode Command d d Tile ID Command dReset Command f k Tile V Size Command d h To adjust the Tile Vertical size Tile H Size Command d gNatural Mode In Tile Mode Command d j DPM Select Command f jOSD Select Command k l Command k mKey Command m c Temperature Value Command d nSerial No.Check Command f y To check the Serial Numbers Elapsed time return Command d l To check the panel used timePC Power Command d s Control the PC power Backlight Command m gPC Power Control Command d t English Model