LG Electronics 72WX70MF Tile H Size Command d g, Natural Mode In Tile Mode Command d j

Page 70

70CONTROLLING THE MULTIPLE PRODUCT

ENGLISH

43.Tile V Position (Command: d f) To adjust the Tile Vertical position.

*This function is available only when the Natural option of the Tile Mode is set to Off while the Tile Mode set to On.

Transmission

[d][f][ ][Set ID][ ][Data][Cr]

Data 0 to 32: 0 (Bottom) to 50 (Top)

*Bottom/Top values depend on Tile Vertical size.

**It may not be supported depending on the model.

Acknowledgement

[f][ ][Set ID][ ][OK/NG][Data][x]

44.Tile H Size (Command: d g)

To adjust the Tile Horizontal Size.

*Set Tile H Position to 0x32 before setting Tile H Size.

*This function is available only when the Natural option of the Tile Mode is set to Off while the Tile Mode set to On.

Transmission

[d][g][ ][Set ID][ ][Data][Cr]

Data 00 to 32: 0 to 50

**It may not be supported depending on the model. Acknowledgement

[g][ ][Set ID][ ][OK/NG][Data][x]

46.Natural Mode (In Tile Mode) (Command : d j)

To display the image naturally, the part of the image that would normally be displayed in the gap between the monitors is omitted.

Transmission

[d][j][ ][Set ID][ ][Data][Cr] Data 00: Off

01:On

Acknowledgement

[j][ ][Set ID][ ][OK/NG][Data][x]

47.DPM Select (Command: f j)

To set the DPM (Display Power Management) function.

Transmission

[f][j][ ][Set ID][ ][Data][Cr]

Data 00: Off

01:On

*Data settings may vary depending on your model as below.

Data 00: Off

01:5 sec.

02:10 sec.

03:15 sec.

04:1 min.

05:3 min.

06:5 min.

07:10 min.

Acknowledgement

[j][ ][Set ID][ ][OK/NG][Data][x]

45.Tile V Size (Command: d h) To adjust the Tile Vertical size.

*Set Tile V Position to 0x00 before setting Tile V Size.

*This function is available only when the Natural option of the Tile Mode is set to Off while the Tile Mode set to On.

Transmission

[d][h][ ][Set ID][ ][Data][Cr] Data 00 to 32: 0 to 50

**It may not be supported depending on the model. Acknowledgement

[h][ ][Set ID][ ][OK/NG][Data][x]

48.FAN Control (Command : d o) To set the Fan mode.

Transmission

[d][o][ ][Set ID][ ][Data][Cr]

Data 00: Auto 01: On

02:Manual

03:Off

**It may not be supported depending on the model.

Acknowledgement

[o][ ][Set ID][ ][OK/NG][Data][x]

Image 70

Contents Monitor Signage Table of Contents Licenses Remote Control and Batteries Power Cord AccessoriesAssembling and Preparing Parts and Buttons Illuminance sensor IR Receiver Power IndicatorConnection Panel Connection panel Portrait Layout Pemnut Not to be UsedA Button Remote ControlVolume Up / Down Number and Alphabet ButtonsReturns to Monitor Selects the Tile ModeNavigation Buttons Scrolls through menus or Viewing from any menuUsing the Monitor Connecting to a PCRGB Connection DVI-D ConnectionHdmi Connection Display Port ConnectionSelecting an Image Mode Adjusting the ScreenCustomizing Image Options Selecting an Sound Mode Adjusting the SoundCustomizing PC Display Options Adjusting Aspect Ratio Using Additional OptionsCustomizing Sound Options Just Scan Component Using the Input ListSelecting an input source Display PortSelect IP Auto Setting or IP Manual Setting Connecting to a Wired NetworkEntertainment Tips for Network setting Network StatusConnecting USB Storage Devices Browsing Files Viewing Movies Supported File FormatsEnergy Not affect Photo List and Music List Video Play., Set Video. or Set Audio.Music List excluding Movie List Language Menu Description Picture SizeAudio SubtitleExit the Mark Mode Viewing PhotosPhoto Options Using Photo OptionsOption Description Transition Effect Option Display the selected music file Listening to MusicMenu Description Mark all music files on the screenButton Description Control playback by using the following buttonsEnergy Saving button Viewing the Contents List DivX VOD Guide DivX VOD RegistrationMedia Using PIP/PBPSelect Movie List or Photo List from My DivX VOD DeregistrationMovie List Settings Customizing SettingsAccessing Main Menus Customizes the generalMaintenance Picture Mode Picture SettingsEnables or disables the luminance maintenance function Mode VividPicture Mode Options Off/High/Low Setting Description Dynamic ContrastDynamic Color Clear WhiteSound Mode Options Press Menu to access the main menusPress the navigation buttons to scroll to the setting or Press the navigation buttons to scroll to Audio and pressAuto off Time SettingsTo prevent overload MinutesOption Settings PC Position Setting Description Tile ModeOption Mode PC SizeProduct/Service Setting Description USB ContentRecovery Info Portrait ModeTile Mode Tile Mode Natural Mode EnglishTop left Bottom left Size Top right Bottom right Position1920x1080 Network Settings Making Connections Component Connection Not included YyUse a High Speed Hdmi CableConnecting to a USB AV Cvbs ConnectionConnecting to the LAN Daisy Chain Monitors ModeProblem Resolution TroubleshootingNo image is displayed Screen image looks abnormal Audio function does not work Problem ResolutionAfter-image appears on the product Screen color is abnormal Specifications Applicable only for models that support the speakers DTV Mode RGB PC supported modeHDMI,DVI-D,Display Port PC supported mode IR Codes Code Hexa FunctionControlling the Multiple Product Connecting the CableRS-232C Configurations Communication ParameterCommand Reference List HexadecimalEnglish Transmission Transmission / Receiving ProtocolAcknowledgement Energy Saving Command j q To set the Energy Saving function Power Command k aInput Select Command x b Picture Mode Command d x To select the Picture ModeSharpness Command k k Brightness Command k h Tint Command k jColor Command k Position Command f q Auto Configuration Command j u Position Command f rSize Command f s Balance Command k t To adjust the sound balanceVolume Mute Command k e Bass Command k s Volume Control Command k fSpeaker Command d To control the Volume Mute on/offAcknowledgement Set ID OK/NGData1Data2Data3x Power On Delay Command f h On Timer Input Command f u Sleep Time Command f f Automatic Standby Command m n ISM mode Command j p Language Command f i To set the language for OSDFail Over Select Command m i To set the Fail Over function Reset Command f k Tile ID Command dTile Mode Command d d DPM Select Command f j Tile H Size Command d gNatural Mode In Tile Mode Command d j Tile V Size Command d h To adjust the Tile Vertical sizeTemperature Value Command d n Command k mKey Command m c OSD Select Command k lElapsed time return Command d l To check the panel used time Serial No.Check Command f y To check the Serial NumbersPC Power Control Command d t Backlight Command m gPC Power Command d s Control the PC power English Model