Onkyo TXNR525 En-55, Network Standby ` On ` Off, Update Notice ` Enable ` Disable

Advanced Operations

■Network Standby

`On

`Off

This setting enables or disables control over the network.

When enabled, the NET indicator will be dimly-lit while the AV receiver is in standby mode. Note that the indicator may not light under certain conditions (➔ page 20).

Note

•When set to “On”, the power consumption slightly increases in standby mode.

■Update Notice

`Enable

`Disable

When this setting is enabled, you will be notified if a firmware update via network of high importance is available.

Note

•Selecting “Never Remind me” on the notification window will switch this setting to “Disable” (➔ page 20).

•For details on the update notification, see “Firmware Update Notification” (➔ page 20).

En-55

Operating procedure (➔ page 44)