Onkyo TX-SR8360, TX-SR603/603E instruction manual First Time Setup

First Time Setup—Continued

3	Press [ENTER].
	ENTER

The automatic speaker setup starts. The test tone is output by each speaker in turn, measured by the microphone, and the speaker settings set accordingly. The whole process takes about 2 minutes.

If any extraneous noise is picked up by the microphone, the automatic setup may not work correctly, so be careful.

4	Once the measurement is com-
	pleted, the following completion
	screen appears.
	ENTER

ENTER

Use the Up and Down []/[ ] buttons to select any of the fol- lowing options, and then press [ENTER].

Apply the Results:

Validates the measurement results and closes the screen. Normally you may want to select this option. Continue with step 5.

Check the Results:

Displays the measurement results for your reference. Continue with “How to Verify the Measurement Results” described below.

Retry:

Retries measurement. Return to step 2.

Retry with Test noise Level up:

Retries measurement with the test sound at high volume level. Return to step 2.

Cancel:

Closes the screen without validating the measurement results. Continue with step 5.

5	Disconnect the speaker setup
	microphone.
	To cancel the automatic setup while it’s
	in progress, disconnect the micro-
	phone.

■How to Verify the Measurement Results

By selecting “Check the Results” at step 4, you can dis- play the following screen to confirm the measurement results.

ENTER

1	Warning
2	Number of speakers and their sizes
ENTER	Distance from each speaker to the
3

listening position

4The optimum volume level for each speaker

5The level adjustment for individual frequency range covered by respective speaker

Use the Up and Down []/[ ] buttons to select the item that you want to check, and then press [ENTER].

Press the [RETURN] button to return to the previous display.

40