Onkyo TX-SR603/603E, TX-SR8360 Advanced Setup, Input Channel Settings, PL IIx Music Mode Settings

Page 69

Advanced Setup—Continued

The Audio Adjust functions are explained below.

Input Channel Settings

■Multiplex

This setting determines which channel is output from a stereo multiplex source. Use it to select audio channels or languages with multiplex sources, multilingual TV broadcasts, and so on.

Main: The main channel is output (default). Sub: The sub channel is output.

Main/Sub: Both the main and sub channels are output.

■Mono (2chSource)

This setting specifies the channel to be used for playing any 2-channel digital source such as Dolby Digital, or 2- channel analog/PCM source in the Mono listening mode.

L+R: Both the left and right channels are output (default).

L:Only the left channel is output.

R:Only the right channel is output.

PL IIx Music Mode Settings

These settings provide for playing any 2-channel digital source such as Dolby Digital, or 2-channel analog/PCM source in the PLIIx Music listening mode.

■Panorama

With this function, you can broaden the width of the front stereo image when using the Pro Logic II Music or Pro Logic IIx Music listening mode.

On: Panorama function on.

Off: Panorama function off (default).

■Dimension

With this setting, you can move the sound field forward or backward when using the Pro Logic II Music or Pro Logic IIx Music listening mode. The default setting is 3. Higher settings move the sound field forward. Lower set- tings move it backward.

If the stereo image feels too wide, or there is too much surround sound, move the sound field forward to improve the balance. Conversely, if the stereo image feels like it is in mono, or there is not enough surround sound, move it backward.

■Center Width

Neo:6 Music Mode Setting

■Center Image

The DTS Neo:6 Music listening mode creates 6-channel surround sound from 2-channel (stereo) sources. With this setting, you can specify by how much the front left and right channel output is attenuated in order to create the center channel. It can be adjusted from 0 to 5 (default is 3). This setting is unavailable if no surround speakers are connected.

When set to 0, the front left and right channel output is attenuated by half (–6 dB), giving the impression that the sound is located centrally. This setting works well when the listening position is considerably off center. When set to 5, the front left and right channels are not attenu- ated, maintaining the original stereo balance.

Dolby Digital EX Input Signal Setting

■Dolby D EX

This setting determines how Dolby Digital EX signals are handled. This setting is unavailable if no surround back speakers are connected.

Auto: If the source signal contains a Dolby Digital EX flag, the Dolby Digital EX listening mode is used (default).

Manual: You can select Pro Logic IIx Movie, Pro Logic IIx Music, Dolby Digital, or Dolby Digital EX.

With this function, you can adjust the width of the sound from the center speaker when using the Pro Logic II Music or Pro Logic IIx Music listening mode. Normally if you are using a center speaker, the center channel sound is output by only the center speaker. (If you are not using a center speaker, the center channel sound will be distributed to the front left and right speakers to create a phantom center). This setting controls the front left, right, and center mix, allowing you to adjust the weight of the center channel sound. It can be adjusted from 0 to 7 (default is 3).

69

Page 68 Page 70
Image 69
Page 68 Page 70
Contents TX-SR603/603E TX-SR8360 Avis Important Safety InstructionsFor models having a power cord with a polarized plug PrecautionsPower FCC Information for UserPrecautions Supplied AccessoriesMake sure you have the following accessories If in any doubt, consult a qualified electricianAmplifier FeaturesAudio/Video FM/AM TunerTable of Contents Table of Contents Front Panel Front & Rear PanelsFront & Rear Panels Display This jack is for connecting an FM antenna These push terminals are for connecting an AM antennaThese terminal posts are for connecting speakers in Zone Rear PanelPRE OUT Subwoofer jack is for connecting a pow- ered subwooferRemote Controller Installing the BatteriesUsing the Remote Controller Remote Controller Receiver ModeRC-591M Remote Indicator Listening mode buttons 60 Surr button Remote Mode buttonsStandby button On buttonDVD Mode CD Mode Play button MD/CDR ModePrevious & Next / buttons Pause buttonTape Mode Enjoying Home Theater About Home TheaterAbout AV Connections Connecting the AV ReceiverOptical Digital Jacks AV Connection Color CodingConnecting Your Speakers Connecting the AV ReceiverConnecting the Speaker Cables Speaker Connection PrecautionsRead the following before connecting your speakers Strip about 5/8 15 mmConnecting the Indoor FM Antenna Connecting AntennaConnecting the AM Loop Antenna Attach the FM antenna, as shown North American ModelConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaUsing a TV/FM Antenna Splitter Which Connections Should I Use? Connecting Both Audio & VideoVideo Connection Formats Audio Connection FormatsConnecting Your TV or Projector Monitor OutAudio Connections Video Connections Connecting a DVD PlayerYour TV must also be connected via component video DVD playerUsing a Multichannel Connection Connecting a VCR for Playback Connecting an HDD/DVD recorder for PlaybackHDD/DVD recorder Playback from the Recording VCR Connecting a VCR for RecordingVCR recording TV or VCR, etcUsing Optical or Coaxial Connections PRSatellite, cable, set-top box, LD player, etcSatellite, cable, set-top box, LD player, etc Connecting a Camcorder, Game Console, etc Using Analog Connections Using S-VideoCamcorder Game console, etc Connecting a DAT, CD, or MD Connecting a CD Player Connecting a Cassette RecorderRecorder Cassette recorderUsing Optical or Coaxial Connections playback only Digital RecordingDigital source DAT, CD, MD player Turntable with a Built-in Phono Preamp Connecting a TurntableTurntable with an MC Moving Coil Cartridge Turntable without a Built-in Phono PreampConnecting Components Connecting the Power Cord of Another ComponentWith Remote Interactive you can control your Standby indicator will light up Plug the power cord into an ACTurning On the AV Receiver Wall outletAutomatic Speaker Setup First Time SetupFirst Time Setup Menus vary depending on country Distance ErrorNot Detect TipMain menu Submenus About the Onscreen Setup MenusDigital Input Initial SetupMinimum Speaker Impedance not North American models Component Video SetupTV Format Setup not North American models Speaker Setup AM Frequency Step Setup some models onlyRight / buttons to select 10 kHz Select if 10 kHz steps are Config, and then press Enter Buttons to select 1. SpeakerButtons to select d. Surround Buttons to select f. SurrBackDouble Bass CrossoverButtons to select a crossover frequency Buttons to select h. DoubleSpeaker Distance Buttons to specify the dis- tanceRepeat for all speakers Speaker Level Calibration Use the Left and RightButtons to select each speaker Equalizer Setting Repeat this step to select TAPE, MD, or CDR Changing the TAPE/MD/CDR DisplaySelecting the Input Source Basic OperationsSource Receiver button, and then use the Input Selector buttonsSetting the Display Brightness Using the Sleep TimerUsing Headphones Basic OperationsDisplaying Source Information Left and surround right. If there’s surround backInterpreting Surround Channel Values Using the Tuner Tuning into Radio StationsListening to the Radio Presetting Radio Stations Deleting Presets Selecting Preset StationsDisplaying Radio Information What is RDS? Using RDS European models onlyProgram Types Used in Europe PTY You can also search for radio stations by type seeDisplaying Radio Text RT Listening to Traffic News TPFinding Stations by Type PTY Selecting with the Remote Controller Selecting Listening ModesSelecting on the AV receiver Multich About the Listening Modes Onkyo Original DSP Modes Using the Late Night Function Dolby Digital only Using the CinemaFILTERAdvanced Operations Then press the Cine FltrAdjusting Individual Speaker Levels Using the DVD Analog Multichannel InputSo that the Multi CH indicator Advanced OperationsAdjusting Individual Speaker Levels RecordingUse the Up and Down Buttons to select each speaker AV Recording Recording Separate AV Sources Adjusting the Bass & Treble Audio Adjust Functions Advanced SetupInput Channel Settings Advanced SetupPL IIx Music Mode Settings Neo6 Music Mode SettingAssigning Listening Modes to Input Sources Setting Preferences IntelliVolumeIntelliVolume Then press EnterInterlacedDefault Digital Input Signal FormatsPress and hold the AV receiver’s Digi TAL Input button for about 3 secondsPress and hold down the Receiver Changing the Remote Controller’s IDButton, and then press the TV Input Control IDUsing Only Speakers in Zone Using a Receiver/Integrated Amp in ZoneZone Buttons to select g. Powered Setting the Powered ZoneLowed by the Setup button Press the Setup button Zone 2, and use the LeftUsing Zone Using the 12V Trigger Using the Remote Control in ZoneUsing a Multiroom Kit with a Cabinet Using a Multiroom Kit with ZoneSetting the MD/CDR Button to CDR Entering Remote Control CodesControlling Other Components Codes for Onkyo DVD PlayersResetting Remote Mode Buttons Resetting the Remote ControllerControlling Other Components Remote Control Codes DVD DVD playerSAT satellite receiver ABC CBL cable receiverSBR NAD Controlling a Cable Receiver Controlling a TVControlling a VCR Controlling a Satellite Receiver Learning Commands from Another Remote Controller Using Macros Making MacrosRunning Macros Amplifier Section SpecificationsVideo Section Tuner SectionTroubleshooting Troubleshooting Can’t control other components? Remote controller doesn’t work?Can’t record? Zone 2 has turned off?Speaker volume cannot be set as required? Sound changes when I connect my head- phones?Speaker distance cannot be set as required? Display doesn’t work?
Top Page Image Contents