Onkyo TX-SR603/603E, TX-SR8360 instruction manual Initial Setup, Digital Input

First Time Setup—Continued

Initial Setup

Digital Input

If you connect a component to a digital input jack, you must assign that jack to an input selector. For example, if you connect your CD player to the OPTICAL IN2 jack, you should assign that jack to the CD input selec- tor. By default, the COAXIAL IN1 jack is assigned to the DVD input selector, although this can be changed.

DIGITAL INPUT

		Input selector buttons
1		Press the input selector button
DVDVIDEO 1	VIDEO 2 for the source that you want to
		assign.
VCR 1	VCR 2	(Digital inputs cannot be assigned to
VIDEO 3	TAPE	the TUNER input source)

CD

2	Press the [DIGITAL INPUT] but-
	ton.
DIGITAL INPUT	The current assignment appears.

Examples:

If you connect your DVD player to the OPTICAL IN 2 jack, set “DVD” to “OPT2.”

If you want to listen to audio from the component connected to the OPTICAL IN 3 jack when the VIDEO 1 input selector is selected, set “VIDEO1” to “OPT3.”

If you want to listen to audio from the component connected to the COAX- IAL IN 1 jack when the VIDEO 2 input selector is selected, set “VIDEO2” to “COAX1.”

For input selectors that you don’t want to assign a digital input jack, set to “---- (analog).”

3

DIGITAL INPUT

Press the [DIGITAL INPUT] but- ton repeatedly to select COAX1, COAX2, OPT1, OPT2, OPT3, or

–– – – (analog).

•There are no assignments for

TUNER.

•VIDEO 4 is used only for digital input from the front panel terminals.

43