LG Electronics MT-50PZ40, MT-50PZ41, MT-50PZ43S, MZ-50PZ42, MZ-50PZ43 Balance Commandt

Page 27

19. Balance (Command:t)

GTo adjust balance.

You can also adjust balance in the audio menu.

Transmission

[k][t][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64

*Refer to ‘Real data mapping1’ (See p.28).

Acknowledgement

[t][ ][Set ID][ ][OK][Data][x]

Data Min : 0 ~ Max : 64

20. Colour temperature (Command:u)

GTo adjust colour temperature.

You can also adjust CSM in the video menu. Transmission

[k][u][ ][Set ID][		][Data][Cr]

Data	0: Normal	1: Cool	2: Warm	3: User
Acknowledgement

[u][	][Set ID][ ][OK][Data][x]

Data	0: Normal	1: Cool	2: Warm	3: User

21. Red Adjustment (Command:v)

GTo adjust red in colour temperature.

Transmission

[k][v][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64

* Refer to ‘Real data mapping 2’ (See p.28).

Acknowledgement

[v][ ][Set ID][ ][OK][Data][x]

Data Min : 0 ~ Max : 64

22. Green Adjustment (Command:w)

GTo adjust green in colour temperature.

Transmission

[k][w][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64

* Refer to ‘Real data mapping 2’ (See p.28).

Acknowledgement

[w][ ][Set ID][ ][OK][Data][x]

Data Min : 0 ~ Max : 64

23. Blue Adjustment (Command:$)

GTo adjust blue in colour temperature.

Transmission

[k][$][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64

* Refer to ‘Real data mapping 2’ (See p.28).

Acknowledgement

[$][ ][Set ID][ ][OK][Data][x]

Data Min : 0 ~ Max : 64

24. PIP input select (Command:y)

GTo select input source for sub picture in PIP mode.

Transmission

[k][y][ ][Set ID][ ][Data][Cr]

Data 0	: RGB1	1	: Component (or AV1)
2	: Video (or AV2)	3	: S-Video
4	: RGB2

Acknowledgement

[y][ ][Set ID][ ][OK][Data][x]

Data 0	: RGB1	1	: Component (or AV1)
2	: Video (or AV2)	3	: S-Video

4: RGB2

25.Orbiter (Command:p)

GTo control the orbiter function on/off.

Transmission

[j][p][ ][Set ID][ ][Data][Cr]

Data 0 : Orbiter off

1: Orbiter on

Acknowledgement

[p][ ][Set ID][ ][OK][Data][x]

Data 0 : Orbiter off

1: Orbiter on

26.White Wash (Command:q)

GTo control the white wash function on/off.

Transmission

[j][q][ ][Set ID][ ][Data][Cr]

Data 0 : White Wash off 1 : White Wash on

Acknowledgement

[q][ ][Set ID][ ][OK][Data][x]

Data 0 : White Wash off 1 : White Wash on

27

Image 27

Contents Plasma Monitor LG Plasma Monitor Contents Do not insert any object into the exhaust vent Safety InstructionsDo not use water the Monitor while cleaning Earth wire should be connectedDo not pull the cord but the plug when unplugging Objects like a heaterOnly use the specified batteries Controls of the Monitor Front Panel ControlsBack Panel External Speaker 8 ohm output Watching External EquipmentsBack Panel RCA Type Scart TypeHow to connect Watching VCR When the Interface board is installedWatching Cable TV When the Interface board is installed Watching DVD When the Interface board is installedConnecting PC Setup Instructions to Connect a PC to your MonitorPC Setup RGB2 mode Resolution Horizontal Vertical Displayable Monitor SpecificationRGB1 mode Resolution Horizontal Vertical Resolution Horizontal VerticalInstalling Batteries Controls of the remote controlOptional Extras AccessoriesMonitor Installation To install as wall mounting typeTo install as desktop type Adjusting volume level Menu language setupTurning on the Monitor just after installation Turning on the Monitor power cord is still connectedPSM Picture Status Memory Adjusting Auto Colour ControlManual Colour Temperature ControlUser option Video MenuAudio Menu AVL Auto Volume LevelerAdjusting Sound Manual Setting Press the SSM button to select the picture appearance setupTime Menu Setting the ClockSetting the On/Off Timer Sleep TimerWhite Wash Special MenuChild lock OrbiterSplit Zoom Auto adjustment RGB1PC mode onlySetting Picture Format Screen MenuManual Configure RGB1PC mode only Initializing Reset to factory valueScreen Position PIP Function Swapping the Twin Picture Sub Picture Size AdjustmentTwin Picture Selecting a source for the Twin pictureSet ID External Control Device SetupType of connector D-Sub 9-pin male RS-232C configurationsTransmission / Receiving Protocol Command Reference ListPower Commanda Input select Commandb Main picture inputVolume control Commandf Aspect Ratio Commandc Main picture formatScreen mute Commandd Volume mute CommandeRemote control lock mode Commandm Sharpness CommandkPIP Size Commando OSD select CommandlGreen Adjustment Commandw Balance CommandtColour temperature Commandu Red Adjustment CommandvReal data mapping Orbiter Time Setting CommandrOrbiter Pixel Setting Commands Real data mapping 1 0 StepPage No output from one Troubleshooting check listNo picture No soundModel Product specifications