Onkyo TX-NR515 instruction manual En-48, Using the Setup Menu Home, Subwoofer

Using the Setup Menu (HOME)

Remote indicator

RECEIVER

	ENTER
	q/w/e/r
	RETURN
	HOME
1	Press RECEIVER followed by HOME.
2	Use e/rto select “Setup”, and then press ENTER.
3	Use q/wto select a main menu item, and then press
	ENTER.
4	Use q/wto select a sub menu item, and then press
	ENTER.
5	Use q/wto select a setting target, and use e/rto
	change the setting.

Press HOME to close the menu.

Press RETURN to return to the previous menu.

Note

•This procedure can also be performed on the AV receiver by using SETUP, the cursor buttons, and ENTER.

•During Audyssey 2EQ® Room Correction and Speaker Setup, messages, etc., that are displayed on the TV screen will appear on the AV receiver’s display.

■Screen saver

If there is no video signal on the current input source and no operation for a specific time (three minutes by default), a screen saver automatically comes on.

Tip

•The time until the screen saver activates itself can be changed in the “Screen Saver” setting (➔ page 61).

•The screen will return to its previous state if the AV receiver is operated.

Advanced Operations

Explanatory Notes

a Main Menu Speaker Setup

bSpeaker Configuration

c■ Subwoofer

d`Yes `No

aMain Menu

bSub Menu

cSetting target

dSetting options (default setting underlined)

Sub Menu

Main Menu

En-48