Onkyo TX-NR515 instruction manual En-62, Hdmi ControlRIHD, Hdmi Through, ` Last, Audio TV Out

HDMI

■HDMI Control(RIHD)

`Off

`On

Turn this setting on to allow p-compatible components connected via HDMI to be controlled by the AV receiver (➔ page 88).

Note

•When the setting is set to “On” and the menu is closed, the names of connected p-compatible components and “RIHD On”

are displayed on the AV receiver.

“Search…” → “(name)” → “RIHD On”

When the AV receiver cannot receive the name of the component, it is displayed as “Player*” or “Recorder*”, etc. (“*” shows up and indicates the number of components, when two or more are received).

•When an p-compatible component is connected to the AV receiver via an HDMI cable, the name of the connected component is displayed on the AV receiver display. For example, while you are watching TV broadcasting, if you operate a Blu-ray Disc/DVD player (being powered on) with the remote control of the AV receiver, the name of the Blu-ray Disc/DVD player will be displayed on the AV receiver.

•Set it to “Off” when a connected piece of equipment is not compatible or it is unclear whether the equipment is compatible or not.

•If operation is not normal when set to “On”, change the setting to “Off”.

•Refer to the connected component’s instruction manual for details.

•When “HDMI Control(RIHD)” setting is set to “On”, the power consumption on standby mode slightly increases. (Depending on the TV status, the AV receiver will enter standby mode as usual.)

•The pcontrol does not support HDMI OUT SUB. Use

HDMI OUT MAIN instead.

•When the source equipment is connected with the u connection, it may malfunction if “HDMI Control(RIHD)” is set to “On”.

■HDMI Through

`Off

`BD/DVD, CBL/SAT, GAME, PC, AUX, TV/CD, EXTRA1, EXTRA2:

Selects the input source for which the HDMI Through function is enabled.

`Last:

The HDMI Through function is activated on the input source selected at the time of setting the AV receiver to standby mode.

When enabling the HDMI Through function, regardless of whether the AV receiver is on or in standby, both audio and video streams from an HDMI input will be output to the TV or other components via HDMI connection. The HDMI indicator will be dimly-lit in standby mode. Note that the indicator may not light under certain conditions (➔ page 49).

This setting is fixed to “Auto” automatically when the above “HDMI Control(RIHD)” setting is set to “On”, resulting in automatic input source selection.

Note

•Only the input source assigned to the HDMI IN via “HDMI Input” is enabled (➔ page 50).

•The power consumption in standby mode will increase during the HDMI Through function; however in the following cases, the power consumption can be saved:

–The TV is in standby mode.

–You are watching a TV program.

•Refer to the connected component’s instruction manual for details.

•Depending on the connected component, the correct input source may not be selected with the setting fixed to “Auto”.

•This setting is set to “Off” automatically when the “HDMI Control(RIHD)” setting is set to “Off”.

Advanced Operations

■Audio TV Out

`Off

`On

This preference determines whether the incoming audio signal is output from the HDMI output. You may want to turn this preference on if your TV is connected to the HDMI output and you want to listen to the audio from a connected component through your TV’s speakers. Normally, this should be set to “Off”.

Note

•If “On” is selected and the audio can be output from the TV, the AV receiver will output no sound through its speakers. In this case, “TV Speaker” appears on the AV receiver’s display by pressing DISPLAY.

•When “HDMI Control(RIHD)” is set to “On”, this setting is fixed to “Auto”.

•With some TVs and input signals, no sound may be output even when this setting is set to “On”.

•When “Audio TV Out” or “HDMI Control(RIHD)” is set to “On” and you’re listening through your TV’s speakers

(➔ page 16), turning up the AV receiver’s volume control will make the sound be output from the AV receiver’s front left and right speakers. To stop the AV receiver’s speakers producing sound, change the settings, change your TV’s settings, or turn down the AV receiver’s volume.

•Listening mode cannot be changed when this setting is set to “On” and the input source is not HDMI.

En-62