Onkyo TX-NR515 Initial Setup, En-21, Selecting the Language for the Onscreen Setup Menus, Enter

Initial Setup

This section explains the settings that we recommend you to make before using the AV receiver for the very first time. A setup wizard is launched upon first-time use to let you perform those settings.

The on-screen menus appear only on a TV that is connected to the HDMI OUT MAIN.

Selecting the Language for the Onscreen Setup Menus

This step determines the language used for the onscreen setup menus. See “Language” in “OSD Setup”

(➔ page 61).

Tip

•Pressing HOME will close the setup wizard. To restart the initial setup, select “Initial Setup” in the “Hardware Setup” menu (➔ page 64).

After selecting the language for on-screen setup menus, a welcome screen is displayed.

Initial Setup

Welcome to initial setup. Have you connected all

the speakers and devices? Before starting, please connect speakers and sources. Now, would you like to start initial setup?

1st Step : Audyssey 2EQ: Auto Setup

2nd Step : Source Connection

3rd Step : Remote Mode Setup

4th Step : Network Connection

Yes

No

HOME Exit

1 Use q/won the AV receiver or remote controller to select one of the following options, and then press

ENTER.

`Yes:

Continues to “Audyssey 2EQ: Auto Setup”.

`No:

Skips the settings and terminates the initial setup. The setup wizard goes to “Terminating the Initial Setup”. You can always restart the initial setup by selecting “Initial Setup” in the “Hardware Setup” menu (➔ page 64).

Turning On & Basic Operations

Audyssey 2EQ: Auto Setup

This step performs the automatic speaker setup.

1 Use q/wto select one of the following options, and then press ENTER.

`Do it Now:

The automatic speaker setup is performed following instructions on screen. Refer to step 2 of “Using the Automatic Speaker Setup”

(➔ page 34). When this setting is complete, the setup wizard continues to “Source Connection”.

`Do it Later:

Skips this setting.

Press ENTER and continue to “Source

Connection”.

En-21