![Locking Your Setup Values](/images/new-backgrounds/86518/8651857x1.webp)
About Link 1000 Settings
Locking Your Setup Values
After you have set up the Link 1000, you can lock the settings to prevent anyone from inadvertently changing them.
To lock the setup:
1.Hold down SET until SEL appears.
2.Press SEL until the LOCK LED comes on.
3.Press SET. The word ON or OFF appears
4.If OFF appears, press SET to turn the lock On.
Resetting Values
You can reset Ah to zero, or you can reset all values to their factory defaults:
•Resetting Ah to zero does not remove historical battery data.
•Resetting all values to factory defaults (Reset All) removes historical battery data. You usually use Reset All when you change a battery or a battery bank.
To reset values:
1.Hold down SET until SEL appears in the display.
2.Press SET five times until the RESET LED comes on and AH appears.
3.At this point you can reset Ah only, or you can Reset All:
•To reset Ah only, press SET until ALL appears, and then release SET.
•To restore all factory settings, press SET until ALL appears, and then continue to hold SET for another five seconds until 00.0 appears quickly and disappears.
21