
Advanced display utilities
Thin client
Projecting the desktop screen of a remote computer connected via a network onto the projector, you can remotely control the remote computer through the projector.
To use the thin client function, you need to install the software “ThinClient.exe” contained in the attached
Supported OS’s are as follows:
•Windows XP (except Home Edition)
•Windows Vista (except Home Basic and Home
Premium)
•Windows 7 (except Starter and Home Premium)
•Windows Server 2008 R2
•Windows MultiPoint Server
Important:
•License terms for Windows XP, Windows Vista and
Windows 7 do not permit simultaneous operation by multiple users.
•To use the thin client function with Windows Server
2008 R2 or Windows MultiPoint Server, a Client Access License (CAL) is required. For details, see “Client Access License (CAL)” on page 42.
•Computer audio cannot be output from the projector.
Preparation for using Remote Desktop
The thin client function utilizes the standard Microsoft Remote Desktop function. To use the Remote Desktop function, perform the following preparations on the computer.
Important:
•For the following preparations, log on to the computer using the administrator account.
1. Creating a user account Important:
•You must configure a password for the user account. Do not use
2.Configuring Remote Desktop users Configure the Remote Desktop users as follows.
In Windows Vista, Windows 7, Windows Server 2008 R2 or Windows MultiPoint Server
1.Select
2.In Windows Vista, select [System and Maintenance]. Otherwise, select [System and Security].
•When using Classic View in Windows Vista,
3.Select [System].
4. Click [Remote settings].
5.Select [Allow connections from computers running any version of Remote Desktop (less secure)].
6. Click [Select Users...].
•The “Remote Desktop Users” window is displayed.