Mitsubishi Electronics WD390U-EST user manual Installation of software, Connection, Operation

Advanced display utilities (continued)

3.Click the [Exceptions] tab, check the [Remote Desktop] checkbox and click [OK].

In Windows XP

1.Select [Start]-[Control Panel].

2.Click [Network and Internet Connections].

•When using Classic View, double-click the

Windows Firewall icon and go to step 4.

3.Select [Windows Firewall].

•The “Windows Firewall” window is displayed.

4.Click the [Exceptions] tab, check the [Remote Desktop] checkbox and click [OK].

Installation of software

Installing Thin Client

Before starting installation, be sure to read “ReadMe. txt” contained in the CD-ROM.

1.Copy “ThinClient.exe” contained in the TOOLS folder of CD-ROM to the hard disk of your computer.

2.Double-click “ThinClient.exe” on the hard disk, and start up the installer of the Thin Client.

•Follow the on-screen instructions to install the software.

•When the “Windows Security Alert” window is displayed during installation, proceed as follows:

-In Windows XP or Windows Vista, click [Unblock].

-In Windows 7, click [Allow access].

3.When the installation has been completed, restart the computer.

When deleting ThinClient (Uninstallation)

1.Select [Start]-[All Programs]-[Thin Client]-[Uninstall Thin Client].

•Follow the on-screen instructions to uninstall the software.

Connection

Connect the projector and the computer using a commercially available LAN cable. Connect a USB mouse and USB keyboard to the USB-A terminal on the projector.

AUDIO	AUDIO IN-3L S-VIDEO	SERIAL COMPUTER / COMPONENT VIDEO		USB-B	USB-A LAN
IN-1
AUDIO OUT			IN-1
AUDIO
IN-2	AUDIO IN-3R		IN-2
	VIDEO	MONITOR OUT
					Computer
	To USB-A				To LAN
	terminal				terminal

LAN cable

Wireless keyboard(option) and mouse

Important:

•On Thin Client, use both a keyboard and mouse.

We recommend a commercially available wireless keyboard and wireless mouse intended for a computer with wireless receiver.

•Wired LAN connection is recommended for communication with the computer.

•For wired LAN connection, use a category-5 LAN cable. Both straight-through and crossover cables can be used.

•The USB-A terminal on this projector is compatible with USB 2.0.

•Supported USB devices are standard USB HID devices with power consumption less than 5V/500mA or wireless LAN modules.

•When using a USB hub, you are recommended to use the one with external power supply.

•Some USB hubs cannot be used depending on the specifications.

Operation

Selecting a LAN Display input

1.Press the LAN DISP. button on the remote control or the COMPUTER button on the projector.

•Each time you press the COMPUTER button, the input source is switched between Computer1, Computer2, HDMI, LAN Display, USB Display and PC Less Presentation.

•When the LAN Display input is selected, the splash screen for LAN Display appears on the screen.

EN-40