Mitsubishi Electronics WD390U-EST user manual Advanced features, Password lock, To set a password

Advanced features (continued)

Password lock

This projector provides the password lock function that is intended to prevent wrong operations by children and set controlled access for specified users. If the password lock is enabled, when the projector is turned on, the startup screen (or splash screen) will appear and stay on the screen until the password is entered. When the password is entered, the startup screen will switch to the regular operation screen.

To enable or disable password lock:

(See page 21 for menu setting.)

1.Display the Option menu.

2.Press the  or  button to select Password.

3.Press the ENTER button.

• The Password menu appears.

4.Press the  or  button to select Password.

Password Off

To set a password:

(See page 21 for menu setting.)

1.Display the Option menu.

2.Press the  or  button to select Password.

Password OK

3.Press the ENTER button.

• The Password menu appears.

		Password
Password				Off
Change Password			[ ���� ]
	Adjust			Confirm
	Select

4.Press the  or  button to select Change Password.

5.Press the ENTER button.

•The screen for entering a new password appears.

Password

Password		Off
New Password	[	]
Adjust		Confirm
Select

•When the password has already been set, the screen for entering the old password appears instead. In such a case, enter the old password using the same operation as in next step and press the ENTER button. Then the screen for entering a new password appears.

6.Enter a 4 digit password using the , ,  and  buttons.

(=1, =2, =3, =4)

•To cancel the procedure, press the MENU button.

7.Press the ENTER button.

8.Press the MENU button to exit the menu.

5.Press the  or  button to select On or Off.

6.Press the MENU button to exit the menu.

Important:

•To disable the password lock when the screen for entering the password is displayed, press the MENU and ENTER buttons on the projector at the same time.

EN-55