Mitsubishi Electronics WD390U-EST user manual USB Display, Installation of driver

Advanced display utilities (continued)

USB Display

You can project the computer images inputted via a USB connection.

Supported OS’s are as follows:

•Windows XP

•Windows Vista

•Windows 7

•Windows Server 2008 R2

•Windows MultiPoint Server

•Mac OS X 10.5 or later

Important:

•You need to install the driver only when using MAC

OS X.

•Mac computers based on the PowerPC processors are not supported.

•Only 1-to-1 screen projection is supported.

•Moving images cannot be displayed.

Connection

Connect the projector and the computer using a commercially available USB cable.

Installation of driver

When using Mac OS X, install the driver after connecting the projector and the computer using a USB cable for the first time. Once you have installed the driver, you don’t need to install it again.

Installing USB Display driver

1.Via the Finder, open [USB_DISPLAY] and double- click [USB Display.pkg].

2.Follow the on-screen instructions to install the driver.

AUDIO	AUDIO IN-3L S-VIDEO	SERIAL	COMPUTER / COMPONENT VIDEO	USB-B	USB-A	LAN
IN-1
AUDIO OUT			IN-1
AUDIO
IN-2	AUDIO IN-3R		IN-2
	VIDEO	MONITOR OUT

USB 4-pin	To USB-B
(type B)	terminal
Computer
USB 4-pin	USB cable
(type A)
	(option)

When deleting USB Display driver (Uninstallation)

1.Via the Finder, open the [Applications] folder and double-click the [USB Display] folder.

	To USB port
Important:	2. Double-click [UninstallVendorSpecificType05].

•The USB-B terminal on this projector is compatible with USB 2.0.

•Do not use a USB hub between the projector and the computer.

3. Follow the on-screen instructions to uninstall the driver.

EN-43