Mitsubishi Electronics WD570U, XD560U user manual Installation menu, Lan

Menu operation (continued)

Installation menu

			Installation
Menu Position			Upper Left
Lamp Mode			Standard
Standby Mode				Low
Image Reverse				Off
Auto Power On				Off
Auto Power Off				5Min
Auto Keystone				Off
	Language			English
Reset All				OK
		Adjust		MENU	Exit
		Select

ITEM	SETTING	FUNCTION
Menu Position	5 options	Use this setting to change the position of the menu on the screen.
Lamp Mode	Standard	Select this option when you want to view images in a well-lit room.
	Low	Select to moderate the intensity of the lamp. The operating sound is reduced
		and the lamp lifetime becomes longer.
		• When this mode is switched, projected images may flicker.
		• If this mode is frequently switched, the lamp may be deteriorated.
Standby Mode	Low	Select this option when you don’t use the LAN control, speaker output and
		monitor output during power standby. This option disables them and reduces
		the power consumption during the power standby.
	LAN	Select this option when you control the projector via the LAN during power
		standby.
	Speaker Out	Select this option when you want to output audio from the speaker during
		power standby.
	Monitor Out	Select this option when you want to output video signal from the MONITOR
		OUT terminal in addition to the audio from the speaker during power standby.
Image Reverse	Off	Select this setting when you want to view images from the front with the
		projector set on the floor.
	Mirror	Select this setting when you want to view images from behind the screen with
		the projector set on the floor.
	Invert	Select this setting when you want to view images from behind the screen with
		the projector set at the ceiling.
	Mirror Invert	Select this setting when you want to view images from the front with the
		projector set at the ceiling.
Auto Power On	Off / On	When this mode is set to On, the lamp is automatically lit when the power
		cord is plugged in the wall outlet. Select On when you set the projector at the
		ceiling.
		• When the lamp is off, the projector is in standby. Use the remote control to
		turn on the lamp.
Auto Power Off	Off / 5-60 Min	Selects a desired timer setting until the projector enters the standby mode
		when there is no signal input from the source.
Auto Keystone	Off / On	Select Auto Keystone function.
Language	18 languages	Selects a desired language for the menu.
Reset All	OK	Resets all menu settings except for Password and Language to the default.

•By default, the Lamp Mode is set to Standard. The Lamp Mode is set to either Standard or Low depending on the setting last selected, and you cannot switch the Lamp Mode in about one minute after the lamp is on.

•When the Standby Mode is set to Speaker Out or Monitor Out, the audio of the last selected input is output during standby mode. However, no audio is output when the last selected input was HDMI.

•During standby mode, you cannot change the audio input and the volume from the speaker.

•When Standby Mode is set to LAN, Speaker Out, or Monitor Out, the fans rotate at very low speed during standby after plugging the power cord (with 5 second high speed rotation at the beginning) and after turning off the lamp. This is to cool down the projector operating various functions during standby and is not a malfunction. When Standby Mode is set to Low, the fans stop during standby.

EN-26