Mitsubishi Electronics WD570U, XD560U user manual Others Problem Solution

Page 54

Troubleshooting (continued)

Images are not displayed correctly. (continued)

Problem

Solution

 

 

Projected images

• Connect the plugs of the cables to external devices securely.

become wavy.

• Keep the projector away from equipment generating interfering radio waves.

 

• When the keystone adjustment is carried out, the image may not be displayed

 

correctly because of the type of input signal. This isn’t a product malfunction. In this

 

case, readjust the keystone so that the amount of keystone correction is as small as

 

possible.

Hue is not appropriate.

• Check that the cables connected to the external devices are not broken.

Tint in projected

• Check that Computer Input in the Signal menu is correctly set. (See page 24.)

images is incorrect.

• Check that the cable connected to the external device isn’t broken.

Different color tint.

• When comparing images projected by two projectors, tints in the displayed images may be

 

different because of variation between their optical components. This is not a malfunction.

 

• When comparing the image projected by this projector with those displayed on the

 

television or PC monitor, tints in the displayed images may be different because of

 

difference in the range of color reproducibility. This is not a malfunction.

Only the motion areas

• This is caused by the computer being used. Contact the manufacturer of your

in the images supplied

computer.

from the computer

 

aren’t displayed.

 

Projected images are

• Match the output resolution of your computer with the resolution of the projector.

obscured.

For the method to change the output resolution of the computer, contact the

 

manufacturer of your computer. (See page 59.)

 

• Some images and texts appear obscured during the keystone adjustment. In such

 

cases, use the projector without applying the keystone adjustment. (See page 15.)

Projected images are

• After the POWER button or ON button on the remote has been pressed, or the Lamp

flickering.

Mode setting has changed, images may be flickering until the lamp lights stably. This

 

is an expected behavior.

 

• When selecting the input signal, Auto Position, and Image, the projected image may

 

be flickering temporarily. This is not a product malfunction.

Projector images are

• Projector may be vibrating. Set Auto Keystone to Off or lower the VOLUME button

twitching.

of the Remote control.

Others

 

 

 

Problem

Solution

 

 

The exhaust vents

• This air comes out after cooling the inside of the projector. You may feel hot, but this

emit warm air.

is not a malfunction.

No audio is output.

• Check that the volume isn’t set to low.

 

• Check the Audio Input setting.

 

• When the external device is connected with an HDMI cable, set the audio output of

 

the device to PCM output.

The menu can’t be

• The microcomputers inside the projector may be wrongly operating because of noise.

used.

Press the POWER button to turn off the lamp and unplug the power cord from the

 

wall outlet. Wait about 10 minutes, plug the power cord in, and try again.

“Temperature!!” is

• This indication appears when the ambient temperature rises high. When the ambient

displayed.

temperature stays high, the lamp goes out.

 

Eliminate any causes of the rise in the ambient temperature.

 

• This indication appears when the air inlet or outlet grille is blocked. When they are

 

kept blocked, the lamp goes out.

 

Remove the objects blocking the air inlet or outlet grille.

The mark appears.

• This mark appears when ineffective operation is carried out. This isn’t a product malfunction.

The remote control

• Check that the batteries are loaded in the remote control or the batteries are not

doesn’t function easily

weak. (See page 8.)

or at all.

• Check that the remote control sensor isn’t exposed to direct sunlight or fluorescent

 

light. (See page 8.)

 

• Use the remote control within its operation range. (See page 8.)

 

• Use the remote control at least 10 cm away from the projector.

EN-54

Page 53 Page 55
Image 54
Page 53 Page 55
Contents XD550U XD560U WD570U Risk of Electric Shock Do not Open Contents Important safeguards Important safeguards Control panel Power button ON/STANDBYOverview Terminal panelBottom side Remote control OverviewOperation range of the remote control Remote controlBattery installation Inserting the batteries into the remote controlInstallation Layout of XD550U/XD560ULayout of WD570U When the aspect ratio of the image is 1610 Wxga InstallationWhen the aspect ratio of the screen is When the aspect ratio of the image isCeiling mount installation Front projection, ceiling mountingRear projection Basic connections Projector + AV deviceProjector + DVD player or Hdtv decoder Basic connections Connection for video equipment having an Hdmi terminalProjector + Computer For computer with Mini D-SUBPreparation Adjustment of the projection angleUsing the adjustment feet front Preparation for projectionBasic operation Power-onStatus Power ConditionBasic operation With the remote control Setting the aspect ratioWhen connecting to a laptop computer Watching 3D content With the Picture menuEN-19 You can make various settings using the displayed menus Menu operationHow to set the menus Menu operationMenu items Picture menuVideo Image menu Video ImageRGB Signal menuSignal LPFAudio menu AudioInstallation menu LANOption menu WxgaOption Dhcp Network Config menuSET SsidInformation menu DescriptionInformation To adjust the color Color and Tint Image adjustmentTo adjust the brightness Contrast and Brightness To adjust the tone of white Color TempColor Management Image adjustmentImage GammaTo adjust the horizontal position How to adjust the computer imageSimple method to adjust the image position To adjust the vertical positionNetwork Password settings Network settingsSetting Projector Name Enabling or disabling the network certificationSetting or clearing Dhcp Network settingsIP Config settings IP Address settingsSetting or clearing Dhcp Function Subnet Mask settingsDefault Gateway settings Start IP Address settingEncryption setting Wireless SettingSsid setting Channel setting Press the Enter button Wireless Setting menu appearsHow to use network function Initialization of network settingsWireless Setup setting Restart of network functionConnection Advanced display utilitiesUSB Display OperationWhen deleting LAN Display System Uninstallation Important Installation of softwareInstalling LAN Display System Advanced display utilitiesProjection Hide UI Using remote desktopInstalling the virtual display driver AboutInstallation of PtG Converter-Lite PC Less PresentationConnect a USB device to the USB-A terminal on the projector Performing the PC Less PresentationClick the PtG Converter-Lite icon to execute the program Selecting a PC Less Presentation inputDisplaying PtG file Setting upOFF Displaying Jpeg fileDisplaying with AutoRun function Displaying with slideshow functionEnding the PC Less Presentation Freeze Advanced featuresDisplaying a user-defined image during startup or muting MagnifyTo enable or disable password lock Advanced featuresPassword lock To set a passwordMajor functions PJLink supported commands Lamp replacement When the projector is placed on the tableWhen the projector is mounted to the ceiling Lamp replacement Reset of the lamp operation timeInterval of lamp replacement Troubleshooting No image appears on the screen Problem SolutionTroubleshooting Images are not displayed correctly Problem SolutionOthers Problem Solution Cleaning of the lens MaintenanceCleaning of the projector and the ventilation slots Kensington LockPower Status Condition Possible Solution IndicatorsPower Status Condition Normal conditionSpecifications YPBPR/YCBCRDimension drawings unit mm SpecificationsConnectors Replacement part option/not included in the boxEN-59 Ver
Top Page Image Contents