Mitsubishi Electronics WD570U Advanced display utilities, USB Display, Connection, Operation

Advanced display utilities

USB Display

You can project the computer images inputted via a USB connection.

You don’t have to install any drivers on your computer to use this function.

Important:

•Supported OS’s are Windows XP, Windows Vista and Windows 7.

•Only 1-to-1 screen projection is supported.

•Moving images cannot be displayed.

Connection

Connect the projector and the computer using a commercially available USB cable.

AUDIO	AUDIO IN-3L S-VIDEO	SERIAL	COMPUTER / COMPONENT VIDEO	USB-B	USB-A	LAN
IN-1
AUDIO OUT			IN-1
AUDIO
IN-2	AUDIO IN-3R		IN-2
	VIDEO	MONITOR OUT

AC IN

USB 4-pin	To USB-B
(type B)	terminal
Computer
USB 4-pin	USB cable
(type A)	(option)

To USB port

Important:

•The USB-B terminal on this projector is compatible with USB 2.0.

•Do not use a USB hub between the projector and the computer.

Operation

1.Select a USB Display input by pressing the USB DISP. button on the remote control or the COMPUTER button on the projector.

•Each time you press the COMPUTER button, the input source is switched between Computer1, Computer2, HDMI, LAN Display, USB Display and PC Less Presentation.

•When the USB Display input is selected, the splash screen for USB Display appears on the screen.

2.When the computer is connected to the projector, the computer image is automatically displayed on the screen.

3.When ending the USB Display projection, unplug the USB cable from the projector.

•It is not necessary to “Safely Remove Hardware” on the computer or to press the UNPLUG button on the remote control.

Important:

•When the image is projected, the computer resolution will be changed to WXGA/XGA according to the projector model and will be automatically recovered after unplugging the USB cable.

EN-38