Mitsubishi Electronics XD560U, WD570U user manual Specifications, Ypbpr/Ycbcr

Page 57

Specifications

Type

DLP™ projector

 

Model

XD550U/XD560U

WD570U

Rated power supply

100 - 240 V AC, 50/60 Hz

 

Power consumption

3.4 A

 

 

During standby: 0.5W (when Standby Mode is Low)

Display Technology

0.55-inch single chip Digital Micromirror

0.65-inch single chip Digital Micromirror

 

Device (DMD)

Device (DMD)

 

Pixels: 1024 x 768 = 786432 pixels

Pixels: 1280 x 800 = 1024000 pixels

Colors

16770000 colors

 

Projection lens

F 2.6-3.2, f = 16.0-25.6 mm

F 2.4-3.0, f = 20.7-31.0 mm

Light source lamp

230 W

 

Picture size

40 - 300 inch (Wide) (aspect ratio 4:3)

40–300 inch (Wide) (aspect ratio 16:10)

PC compatibility

Resolution: 640 x 480 (Expand) -

Resolution: 640 x 480 (Expand) -

 

1024 x 768 (Real) -

1280 x 800 (Real) -

 

1600 x 1200 (Compress)

1600 x 1200 (Compress)

 

Sync on Green available

Sync on Green available

Video compatibility

NTSC/NTSC 4.43/PAL (including PAL-M, N)/SECAM/PAL-60

 

Component Video (DVD/HDTV) (480i, 576i, 480p, 576p, 1080i, 720p, 1080p)

Speaker

10 W mono x 1

 

S-video input

Luminance signal: 1.0 Vp-p 75 Ω (negative sync.)

 

Chroma signal: 0.286 Vp-p 75 Ω (burst signal)

Video input

1.0 Vp-p 75 Ω (negative sync.)

 

Audio input

350 mVrms, 10 kΩ or more

 

Analog RGB input

RGB: 0.7 Vp-p 75 Ω (negative sync.)

 

 

YPBPR/YCBCR:

 

 

Y: 1.0 Vp-p (negative sync.)

 

 

PBPR/CBCR: 0.7 Vp-p

 

 

HD/CS: TTL level (positive or negative)

 

 

VD: TTL level (positive or negative)

 

HDMI input

HDMI 19-pin

 

 

HDMI interface (TMDS single link) (only PCM audio is supported)

Control connector

SERIAL terminal (RS-232C)

 

Outside dimensions

325 x 113 x 258 mm (width x height x depth)

Weight

Approx. 3.5 kg

Approx. 3.8 kg

Length of power cord

71 inch (1.8 m)

 

Temperature, humidity

+41°F (+5°C) - +95°F (+35°C), 30 - 90%

 

(performance guaranteed)

 

 

• The specifications and outside appearance of the projector are subject to change without prior notice.

EN-57

Image 57
Contents XD550U XD560U WD570U Risk of Electric Shock Do not Open Contents Important safeguards Important safeguards Overview Power button ON/STANDBYControl panel Terminal panelOverview Bottom side Remote controlBattery installation Remote controlOperation range of the remote control Inserting the batteries into the remote controlInstallation Layout of XD550U/XD560ULayout of WD570U When the aspect ratio of the screen is InstallationWhen the aspect ratio of the image is 1610 Wxga When the aspect ratio of the image isCeiling mount installation Front projection, ceiling mountingRear projection Basic connections Projector + AV deviceProjector + DVD player or Hdtv decoder Connection for video equipment having an Hdmi terminal Basic connectionsFor computer with Mini D-SUB Projector + ComputerUsing the adjustment feet front Adjustment of the projection anglePreparation Preparation for projectionStatus Power Power-onBasic operation ConditionBasic operation When connecting to a laptop computer Watching 3D content Setting the aspect ratioWith the remote control With the Picture menuEN-19 Menu operation You can make various settings using the displayed menusMenu operation How to set the menusPicture menu Menu itemsVideo Image Video Image menuSignal Signal menuRGB LPFAudio Audio menuLAN Installation menuOption menu WxgaOption SET Network Config menuDhcp SsidInformation menu DescriptionInformation To adjust the brightness Contrast and Brightness Image adjustmentTo adjust the color Color and Tint To adjust the tone of white Color TempImage Image adjustmentColor Management GammaSimple method to adjust the image position How to adjust the computer imageTo adjust the horizontal position To adjust the vertical positionSetting Projector Name Network settingsNetwork Password settings Enabling or disabling the network certificationIP Config settings Network settingsSetting or clearing Dhcp IP Address settingsDefault Gateway settings Subnet Mask settingsSetting or clearing Dhcp Function Start IP Address settingSsid setting Channel setting Wireless SettingEncryption setting Press the Enter button Wireless Setting menu appearsWireless Setup setting Initialization of network settingsHow to use network function Restart of network functionUSB Display Advanced display utilitiesConnection OperationInstalling LAN Display System Installation of softwareWhen deleting LAN Display System Uninstallation Important Advanced display utilitiesProjection Installing the virtual display driver Using remote desktopHide UI AboutPC Less Presentation Installation of PtG Converter-LiteClick the PtG Converter-Lite icon to execute the program Performing the PC Less PresentationConnect a USB device to the USB-A terminal on the projector Selecting a PC Less Presentation inputOFF Setting upDisplaying PtG file Displaying Jpeg fileDisplaying with AutoRun function Displaying with slideshow functionEnding the PC Less Presentation Displaying a user-defined image during startup or muting Advanced featuresFreeze MagnifyPassword lock Advanced featuresTo enable or disable password lock To set a passwordMajor functions PJLink supported commands Lamp replacement When the projector is placed on the tableWhen the projector is mounted to the ceiling Lamp replacement Reset of the lamp operation timeInterval of lamp replacement No image appears on the screen Problem Solution TroubleshootingImages are not displayed correctly Problem Solution TroubleshootingOthers Problem Solution Cleaning of the projector and the ventilation slots MaintenanceCleaning of the lens Kensington LockPower Status Condition IndicatorsPower Status Condition Possible Solution Normal conditionYPBPR/YCBCR SpecificationsConnectors SpecificationsDimension drawings unit mm Replacement part option/not included in the boxEN-59 Ver