Mitsubishi Electronics XL5980LU user manual Advanced features for presentation, Expand, Still

Page 20

Advanced features for presentation

Expand

By pressing the EXPAND button on the remote con- trol, you can magnify the detailed image of the picture. You can also view the screen displaying the picture as its original size (native resolution display).

Setting the Expand mode

1.Press the MENU button.

2.Press the $ or % to select the FEATURE menu.

3.Press the ENTER button.

4.Press the { or } button to select EXPAND MODE or FRAME POSI.

5.Press the $ or % to set the EXPAND MODE or

FRAME POSI.

6.Press the MENU button twice to exit the menu sys- tem.

EXPAND MODE

(EXPAND MODE 1) (EXPAND MODE 2) (EXPAND MODE 3) (EXPAND MODE 4)

REAL screen display

During REAL mode, Press the $ or % buttons for fine adjustment.

During REAL mode, the { and } buttons are not working. At this time, the prohibition mark ( ) appeares on the screen.

The expanding rate cannot be changed by press- ing either the + or - button.

Picture in Picture (PinP)

One of the special features of this unit is the picture- in-picture (PinP) mode. PinP allows you to view differ- ent sources at the same time.

Using the PinP mode

1. Press the PinP button on the remote control.

• When the image from VIDEO IN or S-VIDEO

IN terminal is displayed on the screen, the im-

age from COMPUTER IN terminal is displayed

as sub-image.

• When the image from COMPUTER IN terminal

is displayed on the screen, the image from VIDEO

IN or S-VIDEO IN terminal is displayed as sub-

image.

2. If necessary, select the desired external input source

Normal

Zooming

Zooming

Normal

image

image

image

image

FRAME POSI.

(FRAME POSI. (FRAME POSI. 5) 1~4)

1 2

4 3

Main Sub

image image

Zooming

Native resolution

image

display

of the image by using the VIDEO or COMPUTER

button.

To switch Main image and Sub image

3. Press the { or } buttons on the remote control.

To change frame position

4. Press the $ or % buttons on the remote control.

FRAME POSI.

Using the Expand mode

1. Press the EXPAND button.

You can magnify different areas of the active pic- ture by pressing the {, }, $, % button.

You can change the magnification of the zoomed area by pressing the + or - button.

2.Press the EXPAND button twice on the remote con- trol.

The normal screen display will appear on the screen.

Display enlargement does not work with video input or S-video input.

In EXPAND mode, you cannot adjust the zoom/fo- cus and the volume.

The Expand mode may not function depending on the input signal. For more details, refer to page 29.

(FRAME POSI. (FRAME POSI. 5) 1~4)

1 2

4 3

Main Sub

image image

5.Press the PinP button on the remote control. The sub image will be disappear.

Adjusting contrast, brightness, tint or color is not available in PinP mode.

In PinP mode, both Main image and Sub image are displayed with their frames skipped.

In PinP mode, the audio of the Main image is outputted.

In PinP mode, the images may not move smoothly.

The PinP mode may not function depending on the input signal. For more details, refer to page 29.

The UXGA signal isn’t displayed as a sub image.

Still

How to stop the picture temporarily (still picture).

1.Press the STILL button on the remote control. The picture will freeze temporarily.

To resume picture activity.

2. Press the STILL button on the remote control again.

EN – 20

Image 20
Contents Please read it before using your projector L5980When using the projector in Europe Compliance NoticeContents Important safeguards Lens may shift causing injury or damage to the projector It can lead to fire or electric shockIt can lead to fire If you use incorrect voltage, it can lead to fireOverview Terminal panelAbout the laser beam Using the remote control Battery installationUsing the wired remote control Operation area for wireless control systemInstallation Orientation of the projectorFront projection Front projection, ceiling mount For XL5980U only. For XL5980LU, please refer toProjector + DVD player or Hdtv decoder Basic connectionsProjector + AV device About DDC Projector + ComputerFor Macintosh Adjusting the angle of projection Rotate the adjustment feet for fine adjustmentPreparing the projector for operation Getting ready for projectionTo operate projector power on ConditionVolume from the speaker Anamorphic modeTurning off the projector AV mutePress the Enter button or button Menu operationBasic operation An externally connected power switch such as a breaker even Is off. Use the remote control to turn on the lampExpand Mode .. Select the mode for enlarging screen. See Automatically selected depending on the input signal. IfUse to adjust the horizontal position of the image Use to adjust the vertical position of the imagePicture adjustment User memory for signal settingAdjusting the image Color matrixColor temperature Adjustment from personal computerAdvanced features for presentation ExpandPicture in Picture PinP StillMouse remote control Projector + computer with USB connectorOperation Projector + computer with Serial portHow to reset the operation time meter Lamp replacementInterval of the lamp replacement Maintenance Cleaning the air-filterCleaning the projector and the ventilation slots Cleaning the lensProcedure for setting the Anti-Theft Alarm device Procedure for changing batteriesHow to check battery level Insert dry cell batteries into the theft warning deviceTroubleshooting Problems Cause Possible SolutionsIndicators Unusual temperatureNormal condition Abnormal conditionSpecifications Connectors Dimensional drawings mmReplacement part Option / Not included in the box What’s included in the boxCGA70 With Long Throw Zoom Lens OL-X500LZ With Tele Throw Zoom Lens OL-X500TZWith Rear projection Short Throw OL-X500FR F2.5Mitsubishi Electric Corporation
Related manuals
Manual 32 pages 34.3 Kb