Mitsubishi Electronics XL5980LU user manual Important safeguards

Page 4

Important safeguards

Please read all these instructions regarding your LCD projector and retain them for future reference. Follow all warnings and instructions marked on the LCD pro- jector.

1.Read instructions

All the safety and operating instructions should be read before the appliance is operated.

2.Retain instructions

The safety and operating instructions should be retained for future reference.

3.Warnings

All warnings on the appliance and in the oper- ating instructions should be adhered to.

4.Instructions

All operating instructions must be followed.

5.Cleaning

Unplug this projector from the wall outlet be- fore cleaning it. Do not use liquid aerosol clean- ers. Use a damp soft cloth for cleaning.

6.Attachments and equipment

Never add any attachments and/or equipment without the approval of the manufacturer as such additions may result in the risk of fire, elec- tric shock or other personal injury.

7.Water and moisture

Do not use this projector near water or in con- tact with water.

8.Accessories

Do not place this projector on an unstable cart, stand, tripod, bracket or table. Use only with a cart, stand, tripod bracket, or table recom- mended by the manufacturer or sold with the projector. Any mounting of the appliance should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer.

An appliance and cart combination should be moved with care. Quick stops, excessive force and uneven surfaces may cause the appliance and cart combination to overturn.

9.Ventilation

Slots and openings in the cabinet are provided for ventilation, ensuring reliable operation of the projector and to protect it from overheating. Do not block these openings or allow them to be blocked by placing the projector on a bed, sofa, rug, or bookcase. Ensure that there is adequate ventilation and that the manufacturer's instruc- tions have been adhered to.

10.Power sources

This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power, please consult your appliance dealer or local power company.

11.Power-cord protection

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular at- tention to cords at plugs, convenience receptacles, and points where they exit from the appliance. Do not put the power cord under a carpet.

12.Overloading

Do not overload wall outlets and extension cords as this can result in a fire or electric shock.

13.Objects and liquids

Never push objects of any kind through open- ings of this projector as they may touch danger- ous voltage points or short-out parts that could result in a fire or electric shock. Never spill liq- uid of any kind on the projector.

14.Servicing

Do not attempt to service this projector your- self. Refer all servicing to qualified service per- sonnel.

15.Damage requiring service

Unplug this projector from the wall outlet and refer servicing to qualified service personnel un- der the following conditions:

(a)If the power-supply cord or plug is dam- aged.

(b)If liquid has been spilled, or objects have fallen into the projector.

(c)If the projector does not operate normally after you follow the operating instructions. Adjust only those controls that are covered by the operating instructions. An improper adjustment of other controls may result in damage and may often require exten- sive work by a qualified technician to re- store the projector to its normal operation.

(d)If the projector has been exposed to rain or water.

(e)If the projector has been dropped or the cabinet has been damaged.

(f)If the projector exhibits a distinct change in performance - this indicates a need for service.

16.Replacement parts

When replacement parts are required, be sure that the service technician has used replacement parts specified by the manufacturer or parts having the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

17.Safety check

Upon completion of any service or repair to this projector, ask the service technician to perform safety checks determining that the projector is in a safe operating condition.

EN – 4

Image 4
Contents Please read it before using your projector L5980When using the projector in Europe Compliance NoticeContents Important safeguards Lens may shift causing injury or damage to the projector It can lead to fire or electric shockIt can lead to fire If you use incorrect voltage, it can lead to fireOverview Terminal panelAbout the laser beam Using the remote control Battery installationUsing the wired remote control Operation area for wireless control systemInstallation Orientation of the projectorFront projection Front projection, ceiling mount For XL5980U only. For XL5980LU, please refer toProjector + AV device Basic connectionsProjector + DVD player or Hdtv decoder For Macintosh Projector + ComputerAbout DDC Adjusting the angle of projection Rotate the adjustment feet for fine adjustmentPreparing the projector for operation Getting ready for projectionTo operate projector power on ConditionVolume from the speaker Anamorphic modeTurning off the projector AV muteBasic operation Menu operationPress the Enter button or button An externally connected power switch such as a breaker even Is off. Use the remote control to turn on the lampExpand Mode .. Select the mode for enlarging screen. See Automatically selected depending on the input signal. IfUse to adjust the horizontal position of the image Use to adjust the vertical position of the imagePicture adjustment User memory for signal settingAdjusting the image Color matrixColor temperature Adjustment from personal computerAdvanced features for presentation ExpandPicture in Picture PinP StillMouse remote control Projector + computer with USB connectorOperation Projector + computer with Serial portInterval of the lamp replacement Lamp replacementHow to reset the operation time meter Maintenance Cleaning the air-filterCleaning the projector and the ventilation slots Cleaning the lensProcedure for setting the Anti-Theft Alarm device Procedure for changing batteriesHow to check battery level Insert dry cell batteries into the theft warning deviceTroubleshooting Problems Cause Possible SolutionsIndicators Unusual temperatureNormal condition Abnormal conditionSpecifications Connectors Dimensional drawings mmReplacement part Option / Not included in the box What’s included in the boxCGA70 With Long Throw Zoom Lens OL-X500LZ With Tele Throw Zoom Lens OL-X500TZWith Rear projection Short Throw OL-X500FR F2.5Mitsubishi Electric Corporation
Related manuals
Manual 32 pages 34.3 Kb