Mitsubishi Electronics XL5980LU user manual It can lead to fire or electric shock

Page 5

WARNING:

Unplug immediately if there is something wrong with your projector.

Do not operate if smoke, strange noise or odor comes out of your projector. It might cause fire or electric shock. In this case, unplug immediately and contact your dealer.

Never remove the cabinet.

This projector contains high voltage circuitry. An inadvertent contact may result in an electric shock. Except as specifically explained in the Owner's Guide, do not attempt to service this product yourself. Please contact your dealer when you want to fix, adjust or inspect the projector.

Do not modify this equipment.

It can lead to fire or electric shock.

If you break or drop the cabinet.

Do not keep using this equipment if you break or drop it. Unplug the projector and contact your dealer for inspection. It may lead to fire if you keep using the equipment.

Do not face the projector lens to the sun.

It can lead to fire.

Use correct voltage.

If you use incorrect voltage, it can lead to fire.

Do not place the projector on uneven surface.

Place the projection on a leveled and stable surface only. Please do not place equipment on unstable surfaces.

Do not look into the lens when it is operating.

It may hurt your eyes.Never let children look into the lens when it is on.

Do not turn off the main power abruptly or unplug the projector during operation.

It can lead to lamp breakage, fire, electric shock or other trouble. It is best to wait for the fan to turn off before turning main power off.

Do not touch Air outlet grille and Bottom plate which becomes hot.

Do not touch them or put other equipment in front of Air outlet grille. The heated Air outlet grille and Bottom plate may cause injury or damage to other equipment. Also, do not set the projector on the desk which is easily affected by heat.

Clean the air-filter once a month.

Clean the air-filter frequently. If the filter or ventilation slots become clogged with dirt or dust, the temperature inside of the projector may rise and cause some troubles, such as dam- age of inside parts, and shortening the life of panel.

Do not look into the air outlet grille when projector is operating.

Heat, dust etc. may blow out of it and hurt your eyes.

Do not insert your fingers in the space between the lens and the cabinet.

The lens may shift causing injury or damage to the projector.

Do not block the air inlet and outlet grilles.

If they are blocked, heat may be generated inside the projector, causing deterioration in the projector quality and fire.

Place of installation

For safety’s sake, refrain from setting the projector at any place subjected to high temperature and high humidity. Please maintain an operating temperature, humidity, and altitude as specified below.

Operating temperature: between +41°F (+5°C) and +104°F (+40°C)

Operating humidity: between 30 and 90%

Never put any heat-producing device under the projec- tor so that the projector does not overheat.

Do not attach the projector to a place that is unstable or subject to vibration.

Do not install the projector near any equipment that produces a strong magnetic field. Also refrain from in- stalling near the projector any cable carrying a large cur- rent.

Place the projector on a solid, vibration free surface: oth- erwise it may fall, causing serious injury to a child or adult, and serious damage to the product.

Do not stand the projector: it may fall, causing serious injury and damage to the projector.

Slanting the projector more than ±15˚(right and left or front and rear) may cause trouble or explosion of the lamp.

Do not place the projector near air-conditioning unit or heater to avoid hot air to the exhaust and ventilation hole of the projector.

ENGLISH

COMPLIANCE NOTICE OF FCC

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the Depart- ment of Communications.

Changes or modifications not expressly approved by Mitsubishi could void the user's authority to operate this equipment.

COMPLIANCE NOTICE OF INDUSTRY CANADA

This Class A digital apparatus complies with Canadian ICES-003.

EN – 5

Image 5
Contents L5980 Please read it before using your projectorCompliance Notice When using the projector in EuropeContents Important safeguards It can lead to fire or electric shock Lens may shift causing injury or damage to the projectorIt can lead to fire If you use incorrect voltage, it can lead to fireTerminal panel OverviewAbout the laser beam Battery installation Using the remote controlUsing the wired remote control Operation area for wireless control systemOrientation of the projector InstallationFront projection Front projection, ceiling mount For XL5980U only. For XL5980LU, please refer toProjector + DVD player or Hdtv decoder Basic connectionsProjector + AV device About DDC Projector + ComputerFor Macintosh Rotate the adjustment feet for fine adjustment Adjusting the angle of projectionPreparing the projector for operation Getting ready for projectionCondition To operate projector power onAnamorphic mode Volume from the speakerTurning off the projector AV mutePress the Enter button or button Menu operationBasic operation Is off. Use the remote control to turn on the lamp An externally connected power switch such as a breaker evenAutomatically selected depending on the input signal. If Expand Mode .. Select the mode for enlarging screen. SeeUse to adjust the horizontal position of the image Use to adjust the vertical position of the imageUser memory for signal setting Picture adjustmentAdjusting the image Color matrixAdjustment from personal computer Color temperatureExpand Advanced features for presentationPicture in Picture PinP StillProjector + computer with USB connector Mouse remote controlOperation Projector + computer with Serial portHow to reset the operation time meter Lamp replacementInterval of the lamp replacement Cleaning the air-filter MaintenanceCleaning the projector and the ventilation slots Cleaning the lensProcedure for changing batteries Procedure for setting the Anti-Theft Alarm deviceHow to check battery level Insert dry cell batteries into the theft warning deviceProblems Cause Possible Solutions TroubleshootingUnusual temperature IndicatorsNormal condition Abnormal conditionSpecifications Dimensional drawings mm ConnectorsReplacement part Option / Not included in the box What’s included in the boxCGA70 With Tele Throw Zoom Lens OL-X500TZ With Long Throw Zoom Lens OL-X500LZF2.5 With Rear projection Short Throw OL-X500FRMitsubishi Electric Corporation
Related manuals
Manual 32 pages 34.3 Kb