Mitsubishi Electronics XD60U Keystone, Adjustment of the Volume, E-29, General Operation

General Operation

Keystone

Use this to adjust for trapezoidal (keystone) distortion of the pro- jected image.

Adjustment Method

(1)Press the ￿ or ￿ KSTN button to make the left and right sides parallel.

The keystone adjustment display appears when one of the buttons is pressed.

Press the “￿” button. Press the “￿” button.

The dotted lines indicate the proper condition

(2)Press the CANCEL button to immediately close the display. The display will close when there has not been an operation in about 10 seconds.

Note:

*Keystone adjustment values can be saved. See “Keystone Save” on Page E-48.

*Screen examples have been drawn in an exaggerated style for the purpose of description.

*Please note that depending on the projected picture and the projection con- ditions, it may not be possible to eliminate keystone distortion completely.

Adjustment of the Volume

This function adjusts the volume of the built-in speaker.

(1)Press the ￿ or ￿ VOL button to adjust the volume.

The volume adjustment display appears when one of the buttons is pressed.

The ￿ button increases the volume and the ￿ button decreases the volume.

(2)Press the CANCEL button to immediately close the display. The display will close when there has not been an operation in about 10 seconds.

Note:

*Adjustment of the volume will not produce any sound unless an image is being projected.

STANDBY			MENU
RGB		ENTER
VIDEO	CANCEL		QUICK
			Q
(2)
FREEZE	MUTE	LAMP MODE	AUTO
1	2	3	4
			ASPECT
VOL	KSTN	ZOOM	TIMER

(1)

STANDBY			MENU
RGB		ENTER
VIDEO	CANCEL		QUICK
			Q
			(2)
FREEZE	MUTE	LAMP MODE	AUTO
1	2	3	4
			ASPECT
VOL	KSTN	ZOOM	TIMER

(1)

E-29