Mitsubishi Electronics XD60U user manual Setup, Auto Source, Auto Power Off, Menu Position, E-49

Page 50
Setup

Setup

Select menu name “Setup”.

See “Menu Operation Method” on Page E-35 for information about performing menu operations. The item name display will differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-40.

Auto Source

The Auto Source function automatically detects the input signal when the power supply is switched on and when the input is switched.

Select the item name “Auto Source” and select the setting contents with the

SELECT ￿￿ buttons.

On

Switches on the automatic detection function

Off

Switches off the automatic detection function

Signal Detection Order When On

The sequence of PC VIDEO S-VIDEO is searched repeatedly.

When a signal is detected, the search is stopped and the image is projected.

Auto Power Off

This function switches off the projector power automatically when the input of the projector enters a no-signal condition.

Select item name “Auto Power Off” and select the setting contents with the

SELECT ￿￿ buttons.

On

The power is switched off when there is no signal.

Off

The power is not switch off even when there is no signal.

Operation when Function is On

The “No Signal Power Off” display appears when a no-signal condition con- tinues for approximately 10 seconds. The power is switched off about 5 minutes after this.

If a signal is input during the appearance of the display and an operation button other than the STANDBY button is pressed, the display is closed and the function is cancelled.

Note:

Some video decks and other equipment output a blue background or other video when playback ends. When this happens, a signal is being input to the projector and Auto Power Off is not activated.

Menu Position

This function sets the display position of the menu.

Select item name “Menu Position” and select the setting contents with the

SELECT ￿￿ buttons.

•Select menu name “Setup”. ............. Displays on the left side

Auto Source ............. Displays on the right side

E-49

Image 50
Contents DATA PROJECTOR XD60UUser Manual MODELIMPORTANT SAFETY INFORMATION When using the projector in Europe COMPLIANCE NOTICEIMPORTANT SAFETY INFORMATION Place of installation Do not look into the lens when it is operatingDo not look into the air outlet grille when projector is operating Unplug immediately if there is something wrong with your projectorPowerful functions for presentations Major FeaturesLightweight at about 1.5 kg/3.3 lb high-intensity mobile projector Lamp-mode switch function for the lamp outputPreparation and Background Knowledge Table of ContentsSetup and Projection General OperationMiscellaneous Adjustments and SettingsMenu Operations Table of ContentsPower cable 1.8 m / 5.9 feet Checking the Supplied AccessoriesRemote control includes one button battery No. 246C484-10/No. 246C484-20/No. 246C484-30“WARNING” Checking the Supplied AccessoriesCarrying case for projector and accessories Wash hands after handlingNames of the Main Unit Parts SOURCEPC connector E-15 Built-in Security SlotE-10 AUDIO connector E-20Precautions Handling of the Remote Control Names of the Remote Control PartsE-11 Remote Control Range Preparing the Remote ControlButton Battery Replacement Using the remote control for the first time4 Connecting the power cable and switching on the power The Procedure Up to Projecting to the ScreenE-13 When selecting the language of menu displays, etcE-14 Placement GuideScreen Size and Projection Distance E-15 Personal Computers with a DVI ConnectorConnections with Personal Computer Connecting Personal Computers and Video EquipmentConnecting Personal Computers and Video Equipment Personal Computers with a Mini D-Sub 15-Pin ConnectorE-16 DVI/mini D-Sub 15-pin conversion cable Supplied itemManufacturer To Output the External Output Signal of a Notebook ComputerE-17 ModelVideo Equipment with S-VIDEO Connectors Connections with Composite SignalsVideo Equipment with VIDEO Connectors E-18E-19 Connections with Component SignalsWhen the Video Equipment Has a YCbCr Connector or YPbPr Connector Projecting component signalsAudio cable Supplied item Connections with Audio ConnectorsE-20 Audio conversion cablePower Cable Connections and Switching the Power On/Off OperatingE-21 2 Switch on the projector powerPower Cable Connections and Switching the Power On/Off When Menu Language Select is Displayed Upon Switching On the PowerE-22 2 Press the ENTER button to set3 Unplug the power cable Switch off the power of the connected equipmentSwitch off the power of the projector FinishingE-24 Adjustment of the Projection ScreenAdjustment of the Projection Screen 2 Adjust the projection image to the screenAdjustment of the Projection Screen Making Adjustments with the AdjustersE-25 3 Turn the focus ring and adjust the focus of the screenInput Selection Automatic Adjustment of Analog RGBGeneral Operation E-26Personal Computer Signal Selection of Aspect RatioE-27 Video Signals / Component SignalsLamp Mode Cancelling Video and Audio TemporarilyFreezing a Moving Picture E-28E-29 Adjustment of the VolumeKeystone Adjustment MethodE-30 Enlargement of the Image and Video MovementThe image can also be moved in the following circumstances 1 Press the ZOOM button to enlarge the imageTimer settings display Using the Presentation TimerE-31 3 Press the ENTER button and start the timerRegistering the password Protecting the Projector with the Security LockE-32 To cancel the number you have input, press the CANCEL buttonInput the password using the number buttons 1 to E-33If the password input display appears when the power is turned on Canceling the password/Changing the passwordE-34 Using the Quick MenuContent of Adjustments and Settings This function permits frequently used adjustments to be performedE-35 Menu Operation MethodNames and Functions of Buttons Used for Menu Operations Remote ControlItem Name This is the name of the ad- justment or setting Menu Screen Names and FunctionsE-36 Adjustment Bar and Settings ContentsSelection of the Menu Name Performing Menu OperationsMenu Display 1 Press the MENU button to display the menu 2 Press the SELECT button to select the menu name3 Press the SELECT button to display the item name selection cursor Making Adjustments/SettingsDisplaying the Cursor Selection of the Item NameE-39 Selecting Another Menu Name with Remote Control OperationClosing the Menu 6 Press the MENU button and close the menu display The color space can only be adjusted with high definition TVs List of Item Names Offering Input Selection and Adjustments/SettingsE-40 Menu nameE-41 TerminalBrightness / Contrast / Color / Tint / Sharpness Picture Adj. Picture AdjustmentImage Picture Adj. / Fine Picture / H Position / V PositionH Position ResetFine Picture V PositionGamma ColorQuick Color Adj E-44Color Space Color TempWhite E-45White Balance E-46Filter ViewAspect E-47E-48 Vertical Flip/Horizontal FlipKeystone Save The menus and other on-screen displays cannot be adjustedAuto Source SetupAuto Power Off Menu PositionE-50 Presentation TimerInput Format SetupOn Screen OptionLanguage BackgroundE-52 Startup ScreenSecurity Lock OptionInfo Factory DefaultLamp Timer Reset StatusE-54 Resolution / FrequencyLamp Timer This displays the lamp timerE-55 When an Indicator is Lit or BlinkingThermal Protector Indicator statusE-56 TroubleshootingCheck the following matters before requesting servicing Problem Power does not turn onCleaning the Inside of the Projector CleaningCleaning a Soiled Projector Main Unit Dirty LensReplacing the Lamp Cartridge E-58Replacing the Lamp Cartridge E-591 Unplug the power cord 2 Turn the projector upside-down 3 Remove the lamp cover5 Mount the new lamp cartridge E-607 Reset the Lamp Timer 6 Mount the lamp coverOptical SpecificationsE-61 ElectricalSignal Table of Supported FrequenciesE-62 AUTO Cabinet DimensionsE-63 MITSUBISHI ELECTRIC CORPORATION 1 Zusho Baba, Nagaokakyo-City, Kyoto Japan