Mitsubishi Electronics Specifications, E-61, Optical, Electrical, Mechanical, ModelXD60U

Page 62
Specifications

Specifications

ModelXD60U

Optical

Method of projection :

DLP™ (single chip DMD)

DMD

0.7 inches

1024×768 dots

Lamp

170 W high pressure mercury lamp

Projection lens :

Manual zoom (×1.2), Manual focus F = 2.6 – 2.9, f = 27.5 – 33.0 mm

Image size

Minimum 26 inch (at projection distance of 1.20 m / 3.9 feet telephoto)

 

Maximum 300 inch (at projection distance of 11.81 m / 38.76 feet wide)

Light Output

1800 lumens

 

Contrast Ratio

2000:1 (Full on/off)

 

Electrical

Inputs

Video (NTSC3.58/NTSC4.43/PAL/PAL-N/PAL-M/PAL60/SECAM)

 

RGB (Horizontal :15 to 80 kHz, Vertical 50 to 85 Hz)

Color Reproduction

Full color (16,770,000 colors)

Resolution

VGA (640×480) expansion/true, S-VGA (800×600) expansion/true

 

XGA (1024×768) true, S-XGA (1280×1024) compression

Input Current

2.4 A

Power Requirement

100 - 240 V AC, 50/60 Hz

Power Consumption

240 watts (170 watts in Low mode)

Mechanical

Dimensions Excluding Stand

190 mm (W)×53 mm (H)×242 mm (D)

 

7.5 in.(W)×2.1 in.(H)×9.5 in.(D)

Weight

Approximately 1.5 kg / 3.3 lbs

Operational Temperatures

Data projector: 5° to 35°C (41° to 95°F), 30 to 85% humidity

Specifications and design are subject to change without notice.

E-61

Image 62
Contents DATA PROJECTOR XD60UUser Manual MODELIMPORTANT SAFETY INFORMATION When using the projector in Europe COMPLIANCE NOTICEIMPORTANT SAFETY INFORMATION Place of installation Do not look into the lens when it is operatingDo not look into the air outlet grille when projector is operating Unplug immediately if there is something wrong with your projectorPowerful functions for presentations Major FeaturesLightweight at about 1.5 kg/3.3 lb high-intensity mobile projector Lamp-mode switch function for the lamp outputPreparation and Background Knowledge Table of ContentsSetup and Projection General OperationMiscellaneous Adjustments and SettingsMenu Operations Table of ContentsPower cable 1.8 m / 5.9 feet Checking the Supplied AccessoriesRemote control includes one button battery No. 246C484-10/No. 246C484-20/No. 246C484-30“WARNING” Checking the Supplied AccessoriesCarrying case for projector and accessories Wash hands after handlingNames of the Main Unit Parts SOURCEPC connector E-15 Built-in Security SlotE-10 AUDIO connector E-20Precautions Handling of the Remote Control Names of the Remote Control PartsE-11 Remote Control Range Preparing the Remote ControlButton Battery Replacement Using the remote control for the first time4 Connecting the power cable and switching on the power The Procedure Up to Projecting to the ScreenE-13 When selecting the language of menu displays, etcE-14 Placement GuideScreen Size and Projection Distance E-15 Personal Computers with a DVI ConnectorConnections with Personal Computer Connecting Personal Computers and Video EquipmentConnecting Personal Computers and Video Equipment Personal Computers with a Mini D-Sub 15-Pin ConnectorE-16 DVI/mini D-Sub 15-pin conversion cable Supplied itemManufacturer To Output the External Output Signal of a Notebook ComputerE-17 ModelVideo Equipment with S-VIDEO Connectors Connections with Composite SignalsVideo Equipment with VIDEO Connectors E-18E-19 Connections with Component SignalsWhen the Video Equipment Has a YCbCr Connector or YPbPr Connector Projecting component signalsAudio cable Supplied item Connections with Audio ConnectorsE-20 Audio conversion cablePower Cable Connections and Switching the Power On/Off OperatingE-21 2 Switch on the projector powerPower Cable Connections and Switching the Power On/Off When Menu Language Select is Displayed Upon Switching On the PowerE-22 2 Press the ENTER button to set3 Unplug the power cable Switch off the power of the connected equipmentSwitch off the power of the projector FinishingE-24 Adjustment of the Projection ScreenAdjustment of the Projection Screen 2 Adjust the projection image to the screenAdjustment of the Projection Screen Making Adjustments with the AdjustersE-25 3 Turn the focus ring and adjust the focus of the screenInput Selection Automatic Adjustment of Analog RGBGeneral Operation E-26Personal Computer Signal Selection of Aspect RatioE-27 Video Signals / Component SignalsLamp Mode Cancelling Video and Audio TemporarilyFreezing a Moving Picture E-28E-29 Adjustment of the VolumeKeystone Adjustment MethodE-30 Enlargement of the Image and Video MovementThe image can also be moved in the following circumstances 1 Press the ZOOM button to enlarge the imageTimer settings display Using the Presentation TimerE-31 3 Press the ENTER button and start the timerRegistering the password Protecting the Projector with the Security LockE-32 To cancel the number you have input, press the CANCEL buttonInput the password using the number buttons 1 to E-33If the password input display appears when the power is turned on Canceling the password/Changing the passwordE-34 Using the Quick MenuContent of Adjustments and Settings This function permits frequently used adjustments to be performedE-35 Menu Operation MethodNames and Functions of Buttons Used for Menu Operations Remote ControlItem Name This is the name of the ad- justment or setting Menu Screen Names and FunctionsE-36 Adjustment Bar and Settings ContentsSelection of the Menu Name Performing Menu OperationsMenu Display 1 Press the MENU button to display the menu 2 Press the SELECT button to select the menu name3 Press the SELECT button to display the item name selection cursor Making Adjustments/SettingsDisplaying the Cursor Selection of the Item NameE-39 Selecting Another Menu Name with Remote Control OperationClosing the Menu 6 Press the MENU button and close the menu display The color space can only be adjusted with high definition TVs List of Item Names Offering Input Selection and Adjustments/SettingsE-40 Menu nameE-41 TerminalBrightness / Contrast / Color / Tint / Sharpness Picture Adj. Picture AdjustmentImage Picture Adj. / Fine Picture / H Position / V PositionH Position ResetFine Picture V PositionGamma ColorQuick Color Adj E-44Color Space Color TempWhite E-45White Balance E-46Filter ViewAspect E-47E-48 Vertical Flip/Horizontal FlipKeystone Save The menus and other on-screen displays cannot be adjustedAuto Source SetupAuto Power Off Menu PositionE-50 Presentation TimerInput Format SetupOn Screen OptionLanguage BackgroundE-52 Startup ScreenSecurity Lock OptionInfo Factory DefaultLamp Timer Reset StatusE-54 Resolution / FrequencyLamp Timer This displays the lamp timerE-55 When an Indicator is Lit or BlinkingThermal Protector Indicator statusE-56 TroubleshootingCheck the following matters before requesting servicing Problem Power does not turn onCleaning the Inside of the Projector CleaningCleaning a Soiled Projector Main Unit Dirty LensReplacing the Lamp Cartridge E-58Replacing the Lamp Cartridge E-591 Unplug the power cord 2 Turn the projector upside-down 3 Remove the lamp cover5 Mount the new lamp cartridge E-607 Reset the Lamp Timer 6 Mount the lamp coverOptical SpecificationsE-61 ElectricalSignal Table of Supported FrequenciesE-62 AUTO Cabinet DimensionsE-63 MITSUBISHI ELECTRIC CORPORATION 1 Zusho Baba, Nagaokakyo-City, Kyoto Japan