Mitsubishi Electronics XD20A J u s t i n g t h e p i c t u r e e l e m e n t s, To close the menu

Page 22

A d j u s t i n g t h e p i c t u r e e l e m e n t s

The picture elements such as brightness, contrast, white balance, and so on can be adjusted individually for each input source. The adjustable items vary depending on the input source.

(The elements marked with “” are adjustable.)

Input source	VIDEO/S-VIDEO	CONPONENT VIDEO	RGB
BRIGHTNESS
CONTRAST
COLOR			–
TINT		–	–
SHARPNESS		–	–

The elements marked with "" are adjustable.

The element marked with "" is adjustable for NTSC and NTSC4.43 only.

The elements marked with " - " are not adjustable.

1 Select the input source (see page 16)

2 Press the MENU button to display the menu, hold down the cursor ◀ / ▶ keys or the MENU button and then select “IM- AGE”.

3 Press the cursor / keys to select “BRIGHTNESS”.

The items that appear in the menu will differ depending on the input.

4 Press the cursor ◀ / ▶ keys to adjust the brightness.

5 Press the cursor / keys to select “CONTRAST”.

6 Press the cursor ◀ / ▶ keys to adjust the contrast.

Some elements are not adjustable for Video, S- Video and Component (YCbCr) signal in the procedures from Step 7.

Elements that are not adjustable are not dis- played.

7 Press the cursor / keys to select “COLOR”.

8 Press the cursor ◀ / ▶ keys to adjust the color.

9 Press the cursor / keys to select “TINT”.

Note

This adjustment is not possible with color systems other than NTSC and NTSC4.43.

10 Press the cursor ◀ / ▶ keys to adjust the tint.

11 Press the cursor / keys to select “SHARPNESS”.

Note

This adjustment is not possible with YCbCr signal.

12 Press the cursor ◀ / ▶ keys to adjust the sharpness.

To select other menu names

Press the MENU button. The cursor will disappear and the menu selection screen will be displayed.

To close the menu

Press the CANCEL button.

E – 22

Image 22

Contents Data Projector Installation PrecautionsImportant Safeguards Power SupplyB l e o f c o n t e n t s E c k i n g t h e P p l i e d a c c e s s o r i e s Power cable mains lead 1.8 m/5.9 ftA t u r e s RGB cable Audio cable 3.3 ftInserting the batteries Remote control effective rangeE p a r i n g t h e M o t e c o n t r o l Quick Start GuideTop, front and side panel view R t s a n d c o n t r o l sBottom Rear and side panel view Audio jack 10, 11, 12 RGB/YCbCr connector 11Mouse connector Built-in Security SlotAuto button Freeze button Enter button 17 Infrared transmitterMute button Screen height InstallationInstallation Guidelines normal installation Screen sizeRear panel jacks of this device N n e c t i n g v i d e o e q u i p m e n tConnection to the Video jack of the unit Connection to the S-VIDEO jack of the unitConnection to the RGB/YCbCr connector N n e c t i n g a P C o r M a c i n t o s h Windows Changing the computer’s video resolutionsWindows 98/Windows MacintoshI n g t h e u n i t Connect the power cordAdjust the position and height of the unit Turn on the connected source computer, VCR, DVD player, etcCase of RGB input, adjust the video of the connected PC After using the unit I n g t h e u n i t N t i n u e dUSB Port Connection Remote control mouse functionsIBM PS/2 Mouse Port Connection Keystone Adjustment Automatic Screen AdjustmentAdjusting the Volume Freezing animated imagesScreen Reduction To move to the desired portion of the enlarged pictureEnlarging the picture Press the desired portion of the cursor keyN u S t r u c t u r e Common menuNormal menu RGB input Advanced menu To select other menu names Press the cursor / keys to adjust the sharpnessJ u s t i n g t h e p i c t u r e e l e m e n t s To close the menuTiming Chart Adjusting the position of the image Adjusting Clock Frequency and PhaseIf no images appear during setting S e t t i n g ResettingResetting the time the hours of lamp usage S e t t i n g t h e L a m p H o u r s o f U s a g eT t i n g N a r r o w I m a g e s a d v a n c e d M e n u Setting the Cinema ModeAdjusting Color Balance Selecting the Color SystemSetting the Display Frame Setting the RGB/YCbCr connectorSetting Filter Audio Muting Setting the partial display positionI t i a l S e t t i n g s Selecting the BackgroundUsing the Power Saving Function Auto Source SettingsSelecting a Projection Type T t i n g t h e M e n u Troubleshooting Status indicator Status Light MessagesR t r i d g e Lamp cartridge replacement procedureP l a c i n g t h e l a m p StepOptical Specification sSub Pin Assignments ElectricalMm/7.0″ Dimensions230 mm/9.0″ 177