R e s e t t i n g
Resetting
All items can be reset to the standard settings except as follows.
•Lamp usage time
•KEYSTONE adjustment values (including the KEY- STONE setting value: page 28).
•SOURCE CHANGE
1 Press the remote control MENU button to display the normal menu and then press the cursor ◀ / ▶ keys to select “INFOR-
MATION”.
2 When the INFORMATION menu appears, press the cursor 
/ 
keys select “RE- SET”, then press the ENTER button.
3 If the ENTER button is not used during reset, press the CANCEL button.
R e s e t t i n g t h e L a m p H o u r s o f U s a g e
Resetting the time the hours of lamp usage
When the lamp is replaced (page 33), it is necessary to set the lamp hours of usage from the menu.
1 Press the remote control MENU button, use the cursor ◀ / ▶ keys to display the “INFORMATION” menu and set the lamp hours of usage.
2 Display the INFORMATION menu, use the cursor 
/ 
keys to select “LAMP USAGE HOURS RESET” and then press the EN- TER button.
3 If the ENTER button is not used during reset, press the CANCEL button.
When the power will not turn on because the lamp usage hours of has exceeded 1100 hours
The power will not turn on when the lamp hours of usage has exceeded 1100 hours. The status light will be on continually (page 32). Thus, the menu cannot be displayed. In such case, replace the lamp housing, then use the following procedure to reset.
1 Connect the power cord (page 14).
Standby status will be activated.
2 Press the SOURCE and AUTO buttons of the main unit at the same time for 5 sec. or more.
The lamp hours of usage will be reset. After resetting, the Status indicator (page 32) that turned on because 1100 hours had been ex- ceeded will turn off.
To select other menu names
Press the MENU button. The cursor will disappear and the menu selection screen will be displayed.
To close the menu
Press the CANCEL button.
E – 25